User manual JBSYSTEMS LIGHT SMX.3 V1.0

[. . . ] Reproduction or publication of the content, even portions, in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Please read these operating instructions carefully so you will know how to operate this product properly. After you have finished reading the instructions, put them in a safe place for future reference. [. . . ] These presets can be tuned with the "Xparameter knob"(24) in a range from 2mSec up to 2Sec. With the "Y-parameter knob"(25) you can change the balance between the original and the delayed sound. AUTO PAN: Sweeps the music from left to right and back to the rhythm of the beat. With the "presets"(23) you can choose how fast the music sweeps from one side to the other. (example: With preset "2" it will take 2beats to go from left to right and back) The presets can be tuned with the "X-parameter knob"(24) in a range from 30mSec up to 16Sec. With the "Y-parameter knob"(25) you can adjust how quick the music will be panned to the opposite side: you can choose for a gently pan or an aggressive one. fLANGER: This effect is best described as "putting a jet engine in the music". You can easily change the flanger time (cycle) with the "presets"(23). These presets can be tuned with the "X-parameter knob"(24) in a range from 100mSec up to 16Sec. With the "Yparameter knob"(25) you can change the flanger feedback level. Hint: Every time you push the same preset button(23) you will restart the flanger cycle. Hint: use the pitch shifter on a micro and you have a voice changer. (with pitch at -100% you obtain voices from the "dark side of this world" ) The mixer comes with 5 standard filter presets but you can easily adjust these presets(23) with the "X-parameter knob"(24) in a range from low pass filter (LPF) @ 50Hz (display shows: L 0. With the "Y-parameter knob"(25) you can change the filter resonance level. (This is the Q-factor of the filter , it changes the impact of the filter on a selected frequency). You can replace the standard presets with your own parameters, simply by pressing the "X-parameter knob"(24) and one of the 5 preset buttons (23) together. With the preset buttons(23) you can select filter cycles that are beat synchronized. (example: press the preset called "8" it will take 8beats for the filter to change its cutoff frequency from 20kHz to 50Hz and back) The presets can be tuned with the "X-parameter knob"(24) in a range from 100mSec up to 16Sec. With the "Y-parameter knob"(25) you can change the filter resonance level. (This is the Q-factor of the filter , it changes the impact of the filter on a selected frequency) REVERB: This effect is best described as the "church effect". Imagine you play music in a church or in a very big, empty hall: the reverb you get from all kinds of reflections against the walls is digitally simulated with this effect. These reverb times can be tuned with the "X-parameter knob"(24) in a range from 0% to 100% in steps of 1%. [. . . ] If you upgrade both the processor and DSP software, you must always upgrade the processor first!Always check the README-file included with a software update before you start upgrading. Do NOT turn the mixer off or press any button during the upgrading process!You can only interrupt the upgrading process, by switching the mixer off, when the display is still dark after 1minute. [. . . ]