User manual JBSYSTEMS LIGHT QUICK CLAMP V1.0

[. . . ] QUICK CLAMP Operation Manual WWW. BRITEQ-LIGHTING. COM Copyright © 2007 by BEGLEC cva. Reproduction or publication of the content, even portions, in any manner, without express permission of the publisher, is prohibited. V1. 0 ENGLISH OPERATION MANUAL ENGLISH OPERATION MANUAL · Always use a certified safety cable that can hold 12times the weight of the device when installing it. This secondary safety attachment should be installed in a way that no part of the installation can drop more than 20cm if the clamp fails. [. . . ] (no damage to ALU truss!) · Including M8 bolt and wing nut to attach any adapted bracket. · Make sure the area below the installation place is free from unwanted persons during servicing. During inspection the following points should be checked: · All screws used for installing the device and any of its parts should be tightly fastened and may not be corroded. · Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any deformation. SPECIFICATIONS Maximum load: Suited tube diameters: Dimensions: Weight: Max. knob) x 10cm x 3cm +/-0, 5kg 10 years · Before you start using this unit, please check if there's no transportation damage. Should there be any, do not use the device and consult your dealer first. · Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. If you sell the fixture, be sure to add this user manual. BEFORE USE Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www. briteq-lighting. com · · · · SAFETY INSTRUCTIONS: To protect the environment, please try to recycle the packing material as much as possible. Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. Always use an additional appropriate and certified safety cable when installing a device. Due to safety reasons it is prohibited to make unauthorized modifications to the clamps. [. . . ] · Devices should be installed out of reach of people and outside areas where persons may walk by or be seated. · Before rigging make sure that the installation area can hold a minimum point load of 10times the total weight of the device and the clamp. BriTeQ® 1/2 QUICK CLAMP BriTeQ® 2/2 QUICK CLAMP [. . . ]