User manual JBSYSTEMS LIGHT PL-12 V1.0

[. . . ] Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. [. . . ] Therefore this speaker is intended for indoor use only, use of this product outdoors, in humid conditions, voids all warranties. This is potentially dangerous and should only be carried out by technicians who have perfect knowledge of the techniques and regulations of rigging speakers! Cables to be used: You can use readymade cables such as our JB SYSTEMS codes 2-0505 (5m) or 2-0510 (10m) or 2-0525 (25m). Be sure to connect the same color on each side of the cable to the corresponding contact!If you inverse the conductors, poor sound quality with a lack of low frequencies will be the result. For this purpose you can use heavy duty eyebolts with metric M8 thread. In most cases 2 cables will be attached to the top and one is used to pull up the back. This is potentially dangerous and should only be carried out by technicians who have perfect knowledge of the techniques and regulations of rigging speakers!Attention: when a second speaker is connected, the impedance drops from 8 to 4!However, if your amplifier supports 2 loads, you can connect up to 4 cabinets to each amplifier output. [. . . ] Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www. Stevige, lichte klankkast uit Polipropyleen Perfect voor permanente installaties Perfect voor mobiel gebruik High power 12" Woofer High power 1" Compressie Driver & Hoorn Ingebouwde ophangpunten Ingebouwde stand adapter Dubbele Speakon® aansluiting Stevig ingebouwd handvat Stevige rubberen voeten. [. . . ]