User manual JBSYSTEMS LIGHT MR-SU9 V1.1

[. . . ] Before connecting and operating the unit, check if the voltage setting is conform to the voltage available in your area. Please read this instruction manual completely before operating the system. [. . . ] The squelch level is adjustable by the squelch adjustment at the back of the unit, adjust the output level to prevent from the external noise. Special noise absorption parts inside the barrels, which eliminate switch shock noise and handling noise. 5V x 2 batteries into the battery holder according to polarity (+) and (-) indication marked on the battery housing. After setting the chosen frequency same as the receiver, push the power switch to `ON', the LED indicator will flash to indicate the carrier frequency is sending out. Push the power button OFF when the microphone isn't used and remove the battery in the microphone if not used for a long time. This will prevent any damage that a defective `leaking' battery may cause. Switch the power `ON', the LED indicator flashing means that power supply is normal. If the LED indicator lights up it means that the battery is in need of replacement. If there's no flashing, there is no battery or battery is not properly inserted. 005 % with PLL synthesized control : 40 Hz to 15 KHz (± 3 dB) : ± 15 KHz within limiting compressor : 60 dB (A-weighted) : Uni-directional dynamic microphone : DC 1. This system can be used legally in the following European countries: Belgium, France, Germany, The Netherlands and the UK. Please take time to read this manual before asking after service and check following points. [. . . ] This will prevent damage that a defective `leaking' battery may cause. Declare, under our own responsability, that the product: Brand: JB Systems Type: MR-SU9 + UT16A + UF16A on which this declaration has effect, complies with the essential requirements, and other relevant statements of the R & TTE Declaration (1999/5/EC). [. . . ]