User manual JBSYSTEMS LIGHT MPT 200 V1.0

[. . . ] Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Check the contents: Check that the carton contains the following items: Main unit Control unit Operating instructions Pair of cinch cords 2 mini-DIN9 cables Thank you for buying this JB Systems product. To take full advantage of all possibilities, please read these operating instructions very carefully. [. . . ] If the fast search function (4) is active, you will be able to search at a higher speed through the current track. TIME Button: The TIME button switches between elapsed playing time, remaining time in a selection and total remaining time of the disc. (standard = remaining /track) If the button is pressed for more than 1second, the player toggles between single and continuous play: Continuous play: the complete CD will be played without interruption. (mostly used in pubs) Single track: player stops at the end of each track and waits at the beginning of the next track. FAST SEARCH button: press this button to toggle the function of the JOG WHEEL(1) between fast search mode ("SEARCH" shown in the display) and normal mode. The fast search function is automatically turned off when the JOG WHEEL is not used for more than 10seconds. PLAY MODE: normally the JOG WHEEL is used as pitch bend tool to synchronize the beats of the playing track to another track. When the fast search mode is turned on, you can use the JOG WHEEL to search very quickly forward/backward inside the current track. PAUSE MODE: normally the JOG WHEEL is used to search very precisely (1frame precision) for the exact cue point. When the fast search mode is turned on, you can use the JOG WHEEL to search very quickly forward/backward inside the current track. LOOP IN button: Allows you to set the cue point without stopping the playback (CUE ON THE FLY). The player starts to loop seamlessly until you press this button again to exit. When a loop is programmed but not active you can also restart the loop. The point where you press the button will be memorized as the new end point of the loop. In loop edit mode pressing the OUT button stops the loop editing and saves the new loop endpoint. RELOOP/STUTTER button: This button has 2 functions: RELOOP: When a loop was programmed and you have hit the OUT button, press the reloop button to enter the loop again. STUTTER: When a loop is playing you can press this button to restart the loop at once. Every time the RELOOP/STUTTER button is pressed, it will restart the music from the preprogrammed cue point. CUE button: Pressing the CUE button during playback provides an immediate return to the position at which play was started. Playback starts immediately from the programmed cue point for as long as the CUE button is pressed. The CD player jumps back to the cue point as soon as the CUE button is released. Also with the unit in pause mode (Play/Pause button blinks) the jog wheel is used to set a different start point. [. . . ] 64 character style mode-1 only 255 999 mono / stereo sampled at: 32 - 44, 1 - 48kHz 32 ­ 320 Kbps CBR (Constant Bitrate) or VBR (Variable Bitrate) mono / stereo sampled at: 16 ­ 22, 05 - 24kHz 32 ­ 160 Kbps CBR (Constant Bitrate) or VBR (Variable Bitrate) mono / stereo sampled at: 8 ­ 11, 025 - 12kHz 32 ­ 160 Kbps CBR (Constant Bitrate) or VBR (Variable Bitrate) Main unit 482(W) x 88, 8(H) x 246(D) mm Control unit 482(W) x 88, 8(H) x 76, 5(D) mm 6, 5kg With the FOLDER / TRACK selectors you can easily browse through the different folders and tracks. Press the FOLDER/TRACK button (11) to toggle between FOLDER mode and TRACK mode: FOLDER MODE: use the FOLDER SEARCH buttons (12) to select the desired folder. With the TRACK selectors (10) you can select the desired MP3 track in this folder. TRACK MODE: you will be able to browse all the tracks on your CD/CDROM as if no subfolders were present. [. . . ]