User manual JBSYSTEMS LIGHT MIRROR BALL 20CM V1.1

[. . . ] Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. [. . . ] Improper installation can result in serious injuries and/or damage to property. Working load limits should be respected, certified installation materials should be used, the installed device should be inspected regularly for safety. Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. The device should be installed out of reach of people and outside areas where persons may walk by or be seated. Before rigging make sure that the installation area can hold a minimum point load of 10times the device's weight. Always use a certified safety cable that can hold 12times the weight of the device when installing the unit. This secondary safety attachment should be installed in a way that no part of the installation can drop more than 20cm if the main attachment fails. Make sure that the chain used to hang the mirror ball can hold at least 12times the weight of the mirror ball. If you use a mirror ball motor, make sure to use an appropriate motor that can hold the weight of the mirror ball. In order to have a safe installation, you MUST follow the installation instructions supplied with the mirror ball. Make sure the rotation of the mirror ball is never slowed down or stopped by surrounding materials. The operator has to make sure that the safety-relating and machine-technical installations are approved by an expert before using them for the first time. The installations should be inspected every year by a skilled person to be sure that safety is still optimal. To protect the environment, please try to recycle the packing material as much as possible. If a foreign object enters the unit, immediately disconnect the mains power. Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. [. . . ] The cleaning of the optical mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics. Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www. [. . . ]