User manual JBSYSTEMS LIGHT MCD 680 V1.0

[. . . ] `t Hofveld 2 ~ B1702 Groot-Bijgaarden ~ Belgium Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Check the contents: Check that the carton contains the following items: Main unit Control unit Operating instructions 2 cinch cords 1 mini-DIN8 cable 1m 2 fader start cables 1 power cord Thank you for buying this JB Systems product. To take full advantage of all possibilities, please read these operating instructions very carefully. [. . . ] RELOOP/STUTTER button: This button has 3 functions: RELOOP: When a loop was programmed and you have hit the OUT button, press the reloop button to enter the loop again. (intro and end points of the loop are unchanged) STUTTER: When a loop is playing you can press this button to restart the loop at once. Every time the RELOOP/STUTTER button is pressed, it will restart the music from the preprogrammed cue point. ENTER EDIT LOOP MODE: When a loop is programmed (LOOP IN and OUT/EXIT buttons are on) you can enter loop edit mode by pressing the RELOOP/STUTTER button until the display shows "Loop Edit". CUE button: Pressing the CUE button during playback provides an immediate return to the position at which play was started. Playback starts immediately from the programmed cue point for as long as the CUE button is pressed. The CD player jumps back to the cue point as soon as the CUE button is released. Also with the unit in pause mode (Play/Pause button blinks) the jog wheel is used to set a different start point. By pressing "PLAY/PAUSE" or "LOOP IN" button followed by "CUE", you can confirm this new cue point. PLAY/PAUSE button: every time you press the PLAY/PAUSE button the CD player changes from play to pause or from pause to play. TRACK/FOLDER button: This button has several functions: Switch between FOLDER and TRACK mode: press the FOLDER button and left SEARCH BUTTON (9) together to switch between FOLDER and TRACK mode. Refer to the chapter "how to use" to learn more about these modes. FOLDER mode - switch between folders: press the FOLDER button together with the TRACK SEARCH buttons (8) to browse the different folders on the CD/CDROM. TRACK SEARCH buttons: These buttons are used to select the track to be played. In FOLDER mode, press the FOLDER button (7) together with the TRACK SEARCH buttons to select another folder. Press the left search button (search back) together with the FOLDER button (7) to switch between FOLDER and TRACK mode. In some rare cases the automatic beat counter doesn't count as it should do (beats are out of the normal range or there's simply no beat to detect). In these cases you can help the beat counter by manually tapping this button to the rhythm of the beat. You can switch back to the automatic beat counter by pressing the TAP button until the "AUTOBPM" in the left lower corner of the display turns on. PITCH BEND buttons: The speed rises while the "+ button" is pressed and returns to the original pitch when the button is released. The speed drops when the "­ button" is pressed and returns to the original pitch when the button is released. PITCH button: This button is used to turn the speed function on and off. [. . . ] CREATE A LOOP: While a track is playing, press the LOOP IN button to program the start point of the loop. ) While the loop is playing, you can press the OUT button again to exit the loop and continue the rest of the track. It is possible to program a new loop, even when the current loop is still playing. While the loop is playing, simply press the LOOP IN button to set the starting point of the new loop. [. . . ]