User manual JBSYSTEMS LIGHT LED WARNING LIGHT V 1.0

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual JBSYSTEMS LIGHT LED WARNING LIGHT. We hope that this JBSYSTEMS LIGHT LED WARNING LIGHT user guide will be useful to you.


JBSYSTEMS LIGHT LED WARNING LIGHT V 1.0: Download the complete user guide (1449 Ko)

Manual abstract: user guide JBSYSTEMS LIGHT LED WARNING LIGHTV 1.0

Detailed instructions for use are in the User's Guide.

[. . . ] This product meets the requirements of the current European and national guidelines. conformity has been established and the relevant statements and documents have been deposited by the manufacturer. This device has been designed to produce decorative effect lighting and is used in light show systems. [. . . ] If a foreign object enters the unit, immediately disconnect the mains power. Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. The electrical installation should be carried out, according to the regulations for electrical and mechanical safety in your country. Check that the available voltage is not higher than the one stated on the rear panel of the unit. Switch the unit immediately off when the power cord is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. This fixture must be earthed in order to comply with safety regulations. Always use an appropriate and certified safety cable when installing the unit. Apart from the lamp and mains fuse there are no user serviceable parts inside. Always replace a damaged fuse with a fuse of the same type and electrical specifications!In the event of serious operating problems, stop using the fixture and contact your dealer immediately. The housing and the lenses must be replaced if they are visibly damaged. Due to safety reasons it is prohibited to make unauthorized modifications to the unit. Don't use the effect in the presence of persons suffering from epilepsy. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. [. . . ] In the event of serious operating problems, stop using the fixture and contact your dealer immediately. Don't use the effect in the presence of persons suffering from epilepsy. Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE JBSYSTEMS LIGHT LED WARNING LIGHT




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual JBSYSTEMS LIGHT LED WARNING LIGHT will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.