User manual JBSYSTEMS LIGHT LED STRIP V 1.1

[. . . ] This product meets the requirements of the current European and national guidelines. This device has been designed to produce decorative effect lighting and is used in light show systems. ⷠMulticolor plastic tubes with RGB LEDs inside, used to change the color of walls, ceilings, etc. Infinite applications possible: fix the strips behind translucent plexi panels to create slowly changing colored surfaces, ceilings and walls. [. . . ] ⷠMake sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. ⷠThe electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country. ⷠThe cables should always be in perfect condition: switch the LED Manager immediately off when the cables are squashed or damaged. ⷠThis appliance must be used with the LED Manager: don't connect the unit to any dimmer pack or other power supply. ⷠIn the event of serious operating problems, stop using the fixture and contact your dealer immediately. ⷠDue to safety reasons it is prohibited to make unauthorized modifications to the unit. Important: Don't use the effect in the presence of persons suffering from epilepsy. Important: The installation must be carried out by qualified service personal only. Improper installation can result in serious injuries and/or damage to property. Working load limits should be respected, certified installation materials should be used, the installed device should be inspected regularly for safety. ⷠMake sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. ⷠThe device should be installed out of reach of people and outside areas where persons may walk by or be seated. ⷠBefore rigging make sure that the installation area can hold a minimum point load of 10times the device's weight. Make sure that the surface is strong enough and the screws have excellent grip in the mounting surface. The device should be well fixed; a free-swinging mounting is dangerous and may not be considered! ⷠThe operator has to make sure that the safety-relating and machine-technical installations are approved by an expert before using them for the first time. The installations should be inspected every year by a skilled person to be sure that safety is still optimal. Hint: You can install the LED STRIP(s) also behind translucent plastic panels to create color changing walls and ceilings or in a bar you can install the strips under a translucent shelf to lighten bottles and drinking glasses from the bottom. Make sure the area below the installation place is free from unwanted persons during servicing. During inspection the following points should be checked: · All screws used for installing the device and any of its parts should be tightly fastened and may not be corroded. [. . . ] After checking that the maximum allowed power is not exceeded, you can connect the chain to one of the outputs of the LED Manager. example: You have to install 11x 1m-LED STRIP and 6x 0 , 5m LED STRIP 11x10W + 6x5W = 140Watt. This chain can be connected to one of the LED Manager outputs since it does not exceed the allowed 150W. Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www. [. . . ]