User manual JBSYSTEMS LIGHT LED NEON FLEX V 1.0

[. . . ] The minimum distance between light-output and the illuminated surface must be more than 1 meters The device is suitable for mounting on standard flammable surfaces. Standard flammable surfaces include building materials such as wood and wood-based materials more than 2mm thick. To protect the environment, please try to recycle the packing material as much as possible. [. . . ] conformity has been established and the relevant statements and documents have been deposited by the manufacturer. This device was designed to produce decorative effect lighting and is used in light show systems. this LED technology based Neonflex is a perfect direct replacement for the traditional glass neon. It can be used in all kinds of applications like architectural design, cove light, commercial displays ( signs, letters), etc. Some of its huge benefits are: o Visually identical to glass neon but 100% unbreakable. O Up to 90% energy and cost saving compared to glass neon (only 4W/m) o Due to use of high voltage (15kV) glass neon needs a highly specialized installer. O The highly flexible PVC jacket (Rmin = 4cm) can be easily bended to make letters, logos, etc. O Lengths up to 95m can be used to make nice borders and curves on walls, buildings, entrances, etc. Before you start using this unit, please check if there's no transportation damage. Should there be any, do not use the device and consult your dealer first. Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. Check the contents: Check that the carton contains the following items: Operating instructions LED NEONFLEX (sold by unit length) Be careful to cut only on the indicated marks. CAUTION: To reduce the risk of electric shock, do not remove the top cover. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. [. . . ] Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www. The Led Neonflex with the alu mounting strips: The ALU strips are sold in 1meter lengths: you can cut these to the size you like. First fix the alu strips to the wall, then you can place the Neonflex tube inside. [. . . ]