User manual JBSYSTEMS LIGHT CYCLOPE V 1.0

[. . . ] This symbol means: indoor use only This symbol means: Read instructions To protect the environment, please try to recycle the packing material as much as possible. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even cause damages. [. . . ] Don't cover any ventilation openings as this may result in overheating. The operator has to make sure that the safety-relating and machine-technical installations are approved by an expert before using them for the first time. The installations should be inspected every year by a skilled person to be sure that safety is still optimal. MENU button: used to select the different menu items DOWN button: to go back in the menu and to lower the values shown on the display. uP button: to go up in the menu and to increase the values shown on the display. MAIN MENU: To select any of the menu options, press the MENU button up to when the required one is shown on the display. once the required menu option is selected , press the ENTER button to select. To go back to the functions without any change press the MENU button or just wait 8 seconds. Once the correct address shows on the display, press the ENTER button to save it. (or automatically return to the main functions without any change after 8 seconds) To go back to the functions without any change press the MENU button again. Once the mode is selected, press the ENTER button to setup (or automatically return to the main functions without any change after 8 seconds) To go back to the functions without any change press the MENU button again. Press the ENTER button, the current working mode starts blinking in the display Use the DOWN and UP buttons to select (master), (slave in sync with the master) or (2 light show ­ slave in antisync with the master). (or automatically return to the main functions without any change after 8 seconds) To go back to the functions without any change press the MENU button again. Remarks: when "SL 1" or "SL 2" is selected, some menu options are not available. DMX input DMX output ¼" Jack input for the optional CA-8 hand controller Internal microphone Hanging bracket with 2 knobs on both sides to fasten the unit and a mounting hole to fix a mounting hook. Slave LED: is lit when the unit is in slave mode Sound LED: blinks to the rhythm of the music while the unit is in audio mode DMX LED: is lit when the unit receives a DMX-signal Master LED: is lit when the unit is switched as master Show Mode Used to choose to select one of the preprogrammed shows when used in standalone or master/slave mode. This menu option is not available when the unit is set to slave mode ("S L 1 " or "S L 2 ")!Use DOWN and UP buttons to select one of the 12 preprogrammed shows ( (show 12) Once the right show blinks on the display, press the ENTER button to save it. (or automatically return to the main functions without any change after 8 seconds) To go back to the functions without any change press the MENU button again. (show 0) to Important: The electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country. electrical installation for 1 standalone unit: Just insert the mains cable. Remark1: You can connect a CA-8 remote controller to the unit if you want to have more control. [. . . ] Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics. Mains Input: Power consumption: Fuse: Sound Control: DMX connections: DMX channels used: Lamp: Size: Weight: AC 230V, 50Hz 50 Watt 250V 2A slow blow (20mm glass) Internal microphone 3pin XLR male / female 4/10 channels 392 LEDs (R=140 + G=105 + B=84 + W=63): 300 x 308 x 280 mm 5 kg Merci d'avoir choisi ce produit JB Systems . Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www. Excellent programmes intégrés donnant lieu à de splendides light shows qui changent sans arrêt : Contrôle via DMX : choix entre 4 et 10 canaux pour exploiter au mieux les 7 groupes de LED Mode autonome : activation sonore via micro interne Mode maître/esclave : magnifiques shows synchronisés En option, une télécommande CA-8 est disponible. [. . . ]