User manual JBSYSTEMS LIGHT CD 410

[. . . ] Unplug the power cord when not using the set for a long period of time. Do not obstruct the ventilation holes (for sets with ventilation holes). [. . . ] Press once to start playback, once again to set the pause mode, and once more to resume playback. SGL/CTN (Single/Continuous Button) Press it to switch between the single and continuous play modes. CUE (Cue Button) Press the Cue button during playback to return to the position at which playback started. Program (Program Button) Press the Program button, the player will enter the program mode and stop the CD playback. SKIP Use this button to go back to the beginning of the current track or to select a previous track for playing. Search/Scan & Press these buttons to perform frame search function during pause mode or to perform scan function during play mode. In the single mode, the CD player will be paused at the next track when finished playing the current track. Only the other side of the CD player that is standby in pause mode will start playing automatically. Control Connector Connect this connector to the Remote connector on the main unit using the included control cord. If you are using a mixer with fader start function, connect the player with the control out socket. Please note that these sockets must never be connected with any voltage. CUE Indicator The cue indicator lights during cue mode or pause mode, flashes when cue point is changed. [. . . ] TIME BUTTON Hiermee selecteert u de gewenste tijdsaanduiding: elapsed time (verstreken tijd), remain time (resterende tijd) en total remain time (totaal resterende tijd van hele CD). Skip ( 1 track terug ) Gebruik deze toets om terug te gaan naar het begin van de actuele track, of om de voorgaande tracks te selecteren. [. . . ]