User manual JBSYSTEMS LIGHT CA-32 COLORMIX V 1.1

[. . . ] Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. [. . . ] HOLD COLORS BUTTONS: Hold button (2) is active, you can use these buttons to easily select one of the 9 preprogrammed colors. There are two different chase modes: · Static Chase: This is the standard chase mode where you can adjust the chase speed yourself with the Speed fader(6). Sound Chase: You can also use the Sound button(8) to make the chase patterns work to the rhythm of the music. CHASE/SPECTRUM MIX FADER: The function of this fader depends on the selected user mode: · Refer to the text on the left side of the fader to make your choice. Important remark: There's also a function called "color fade" which is very nice for "background lighting" applications. SPEED/FADE SLIDER: The function of this fader also depends on the selected user mode: · Chase mode: the fader is used to select the chaser speed in a range from 0. Spectrum mix mode: When you select the function "color fade" on the spectrum mix fader(5), you can adjust the fade time between colors in a range from 2. SOUND BUTTON: In chase mode, press this button to make the patterns move to the rhythm of the music. The CA-32 has a built-in microphone so there's no need to connect an external music signal. FULL ON BUTTON: At any time, even in blackout(10), you can use this button to set all lamps of the iColor4 to maximum output. [. . . ] This foot controller makes it possible to access most of the CA-32 functions using 4 foot switches. Sound Chase: Também pode utilizar o botão sound (8) para que as sequências sigam o ritmo da música. [. . . ]