User manual JBSYSTEMS LIGHT BT-700S V 1.0

[. . . ] Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. [. . . ] Once the mode is selected, press the ENTER button to confirm your choice. ( or automatically return to the main functions without any change after 30 seconds. ) To go back to the functions without any change press the ESC button. Show Mode Used to choose the Show mode when used in standalone or master/slave mode. Press the ESC button and turn the jog wheel until Show Mode is shown on the display. Once the show mode is selected, press the ENTER button to confirm your choice. ( or automatically return to the main functions without any change after 30 seconds. ) To go back to the functions without any change press the ESC button. Slave Mode Used to make the slave unit work in opposite to the master or to work in complete sync. Press the ESC button and turn the jog wheel until Slave Mode is shown on the display. Once the mode is selected, press the ENTER button to confirm your choice. ( or automatically return to the main functions without any change after 30 seconds. ) To go back to the functions without any change press the ESC button. Adjust Focus 1 Used to help you adjusting the focus of the gobos situated on gobowheel 1 Press the ESC button and turn the jog wheel until Adjust Focus1 is shown on the display. Every time you press the ENTER button, the light beam will point into another direction. Use one of the 2 tilt positions or one of the 4 pan positions to adjust your focus. Use the Jog Wheel to select a value between 0 and 255 Once the value is selected, press the ENTER button to confirm your choice. ( or automatically return to the main functions without any change after 30 seconds. ) To go back to the functions without any change press the ESC button. Adjust Focus 2 Used to help you adjusting the focus of the gobos situated on gobowheel 2 Press the ESC button and turn the jog wheel until Adjust Focus2 is shown on the display. ) To go back to the functions without any change press the ESC button. auto Test Used to activate the internal "self-test" program which shows all possibilities of the unit. [. . . ] After that the unit will be ready to receive DMX signal or run the built-in programs. YOU CAN OPERATE THE UNIT IN 3 WAYS: o By master/slave built-in preprogram function o By CA-8 easy controller o By universal DMX controller ( 16 & 22 channel DMX mode ) BY MASTER/SLAVE BUILT-IN PREPROGRAM FUNCTION: Select this function when you want an instant show. By linking the units in master/slave connection, the first unit will control the other units to give an automatic, sound activated, synchronized light show. Its DMX input will have nothing plugged into it, and its master-LED will be constantly on and sound-LED will flash to the music. [. . . ]