User manual JANE UNLIMIT

[. . . ] WARNING: It is important to make sure that the child is kept away from the pushchair while it is being folded or unfolded. The appearance of cutting, compression and pinch points are inevitable during these operations. [. . . ] Your pushchair has front swivel wheels that can be steered, or the steering can be locked if required. To lock the steering press the button and when the wheels are aligned with the longitudinal axle of the pushchair, they will automatically lock. - REMOVING THE REAR WHEELS WARNING: When the rear brake is on make sure that the pushchair has braked correctly, the word STOP should be completely visible. 14 It may be necessary to gently push the pushchair for the brake to be fully activated. To take the rear wheels off keep the button on the axle pressed down and pull the wheel. - PROTECTOR The protector is fitted onto the hammock, as shown in figure 18. To take the protector off, pull it while pressing the two buttons simultaneously 19 and 19a. It is possible to release only one of the two ends of the protector in order to place the child in the hammock with just one hand. 21 Slide the connecting piece of the hood into the guide on the side of the backrest until it clicks into place. 21a and 21b Once the hood is attached the position can be adjusted by moving the hoops to suit the position of the backrest. WARNING: The child should be kept away from the mobile parts when the responsible adult is handling these. The appearance of cutting, compression and pinch points are inevitable during these operations. The chassis of your pushchair includes the PRO-FIX system, ready for fitting any of the following baby carriers: Transporter, Matrix Light, Strata. 20 The PRO FIX system makes it easy to fasten and remove these accessories onto and off the chassis, in a quick, simple and safe way, with them securely fastened onto the chassis. [. . . ] - SEAT BELT Your pushchair is fitted with a safety harness so your child is secure at all times. Regularly grease the mobile parts and mechanisms with a silicone-based spray. [. . . ]