User manual JANE ROCKET

[. . . ] Not all safety systems are exactly the same, so we recommend that you check your ROCKET in the car where you are going to install it. It is very important that you do not use second-hand products, as JANÉ can only guarantee complete safety on items used by their initial buyer. JANÉ recommends that you replace your ROCKET safety seat with a new one when it has undergone violent pressure following an accident. Check that all the seat belts are in the correct position and correctly adjusted to your ROCKET. [. . . ] To help your baby grow correctly, we advise that you do not over-use the safety seat on long journeys, and that you frequently lay them stretched out in a Moses basket or bed. Your ROCKET safety seat has been designed with the latest safety developments in mind and has been tested under the toughest conditions. it has the following features: Installation in cars: · Slot for passing belts through under the body of the seat that enables it to be installed in cars with shorter seat belts. Car seat belt locking feature that enables the seat to be tightened for greater stability · Chassis ready for installation on a base with ISOfix system (optional). Install the seat in your car with a simple click and no need to thread seat belts through. Comfort and safety for your baby: · The base raises automatically to the headrest's low positions, so extending the seat as far as it will go. Recommended for the first few months when a sitting position makes it difficult for the baby to breathe. 5-point integrated seat belts, greater fastening surface that distributes weight better in the event of an accident. Impact-absorbent material on the entire surface that comes into contact with the baby. 3c Pass the abdominal part of the car seat belt through the front slots on the side of the casing. 3d You should pass the part of the car shoulder strap behind the seat. If you install the seat with the ISOfix base option (optional) follow the instructions that you will find on the base. 4c Put the baby in the safety seat, making sure that they are sitting back in it and that their back is straight. Your Strata carrycot can be fastened to any JANÉ chassis that has the PRO-FIX system. 5a - To fasten the safety seat to a chassis, insert the connections in the cavities on the chassis and press until you hear a click. 5b - To release your Strata from the chassis, press the switch on the handle and pull the seat upwards. Any changes or additions to the Strata without the correct authorisation from JANÉ may seriously affect the safety of the restraining system. Not following the instructions on how to use the restraining system may endanger your baby's safety. [. . . ] Not following the instructions on how to use the restraining system may endanger your baby's safety. This safety device cannot be used without its cover, or replaced with one that is not the original, as it is an integral part of the system's safety features. Make sure that the seat belt is not trapped between the folding seats or doors. Remember not to use the ROCKET safety seat in cars fitted with front air-bags, unless they can be disconnected or deactivated. [. . . ]