User manual JANE RIDER

[. . . ] WARNING: Any load hanging from the handlebar will affect the stability of the pushchair. ADVERTENCIA: No utilice nunca la tira entrepiernas sin el WARNING: Always use the crotch strap in combination with the waist belt. [. . . ] During these operations the appearance of sharp points and compression areas are inevitable. - FOLDING AND UNFOLDING To unfold your RIDER, lightly press the bar on the back to tilt the buggy and make it easier to manoeuvre. 3 Then hold the handlebar with one hand while you press the locking pedal at the bottom on the right. 5 To fold your RIDER place the hammock in the folding position (P) (see ADJUSTING THE ANGLE OF THE SEAT). 6 Then pull the two slide catches on the sides and push the handlebar forwards until the pushchair is completely folded. - PRO-FIX SYSTEM The chassis of your pushchair includes the PRO-FIX system, ready to incorporate the following auto safety elements: Micro, Transporter, Matrix Light and Strata. A The PRO-FIX system makes it easier to attach and remove these accessories to and from the chassis, securing them to the chassis in a quick, simple and safe way. WARNING: It is necessary to remove the hammock from the pushchair to attach any of the auto accessories. With this system, the RIDER hammock can be attached perfectly to the chassis. What's more, the hammock is reversible so it can be positioned facing you or facing forwards. 8 - 8 To take the hammock off, simultaneously pull the unlocking levers situated on both sides of the hammock. Because it is a reversible hammock it can be fitted facing you or facing forwards. [. . . ] Wash the plastic parts with soap and warm water, then dry all the parts thoroughly. - RAIN COVER The rain cover of your RIDER is very easy to fit, simply cover the hammock and fit the hooks onto the chassis to secure it. [. . . ]