User manual JANE OMAD

[. . . ] Check that all the straps are in the correct position and duly adjusted to your OMAD. The child must understand that he must not play with the straps or fasteners under any circumstances. Getting to know the OMAD safety seat Your OMAD safety seat has been designed taking into account the latest advances in terms of safety and it has been tested under the toughest conditions. This increases the resistance of the whole product to pass the strictest safety tests. [. . . ] This prevents the OMAD carrycot from being installed in the vehicle when the backrest is reclined. Integrated 3-point seat belts, greater fastening surface area that spreads the strain out better in the event of an accident. Includes a windbreak membrane to prevent the baby from feeling cold in winter and allows breathability in summer. Shock absorbing material on the whole surface area in contact with the baby. The carrying handle has 2 positions (figure 1a), each one of them has a specific function: Position 1: Hood folded. Position for fitting and removing the carrycot from a JANÉ chassis and for carrying, as well as for use in the vehicle. To change the position, press the double safety catch and then the lever on the handle and turn the handle to the required position. STROLLING Position: The backrest can be reclined by up to 20º when it is installed on your JANÉ pushchair or out of the car. Your OMAD safety carrycot has two types of ventilation channels to improve the breathability of the product and the comfort of your baby: Side ventilation channel. ) Any alteration or addition to the device without proper authorisation from JANÉ may seriously alter the safety of the retaining system. Failure to follow the instructions carefully for the correct use of the retaining system may be dangerous for the safety of the baby. This safety device cannot be used without its cover, or be replaced by another cover that is not the original, as this is an integral part of the safety features of the system. Ensure that the belt has not been caught between the folding seats or doors. It is only suitable for cars fitted with three anchoring point automatic belts, approved according to Regulation ECE-16 or other equivalent rules. 3c - Place the baby in the safety carrycot making sure that he is lying down on the base with his back completely flat. 3d - Insert them in the central lock and press until you hear a click. OMAD can be anchored on any JANÉ chassis that has the PROFIX system. 4a - To fit the safety seat on a chassis, insert the connections in the cavity of the chassis and press until you hear a click. [. . . ] 4a - To fit the safety seat on a chassis, insert the connections in the cavity of the chassis and press until you hear a click. 4b - To release your OMAD from the chassis, press the button on the handle and pull the seat upwards. Not all safety systems are exactly the same, so we advise that you check your OMAD in the car in which it is going to be fitted. It is very important not to use second-hand products, as JANÉ can only guarantee complete safety with items used by their first buyer. [. . . ]