User manual JANE MUUM MATRIX LIGHT

[. . . ] € Keep the instructions in the compartment under the seat, consult them if you have any doubts. Es GE MATRIX LIGHT In o the truc 20 he GENERAL INSTRUCTIONS CE In order to protect your baby adequately and to ensure their comfort and stability in the car, the following instructions must be strictly followed: O- RIX he hat ly, as Your MATRIX LIGHT safety seat can be installed in both the front seat, if it does not have an airbag, and in the back seat of your car. If you position it in the front seat of the car, this must NOT have an AIRBAG, or the airbag must be disconnected. [. . . ] The straps can be adjusted using a tightener so that the seat adjusts to your baby during the whole stage of growth. The MATRIX LIGHT safety seat has a quick shoulder strap height adjustment system, you just have to press a button and slide the adjustment mechanism along the backrest 1a MATRIX LIGHT has 6 different heights for the shoulder straps. 1 To change the position when lying down, pull the plastic flap and slide the adjustment mechanism. 2 To change the position when sitting down, press the button on the backrest and slide it to the required position. Release the button or flap and move the adjustment mechanism to the nearest locking position, it should click into place. Raps CAUTION Check and adjust the height and length of the shoulder straps as the baby grows. English 23 Choosing where to install the safety seat Correctly choosing where to position the safety seat in the car can reduce the risk of injury to the baby in the event of an accident. MATRIX LIGHT occupies two seats: you can choose between a side and a middle seat, so an adult can travel alongside, or completely in the middle. If you decide on middle and side seats, place the MATRIX LIGHT so that the head is as far as possible from the door. It is highly advisable that someone travels alongside the baby to take care of them. If you are travelling alone with your baby, it is a good idea to keep them in sight without being distracted while driving. You can position them in the passenger seat, providing it does NOT have an airbag or the airbag IS DISCONNECTED. Do not be distracted for any reason while driving: to take care of the baby, stop the car completely in a safe place. 2 Installing the seat in the car Posición sentada, GRUPO 0+ The MATRIX LIGHT safety seat must be installed FACING AWAY FROM THE DIRECTION OF TRAVELLING. Decide on which seat after reading the section on “Choosing where to install the safety seat”. 2h - Pass the abdominal part of the car seat belt through the two front guides situated on the sides of the frame. 2i - The shoulder belt of the car should be passed behind the safety seat. Reclining position, GROUP 0 In the reclining position, MATRIX LIGHT must be fitted cross-wise on the back seats. [. . . ] Not all safety systems are exactly the same, so we advise that you check your MATRIX LIGHT in the car in which it is going to be fitted. It is very important not to use second-hand products, as JANÉ can only guarantee complete safety with items used by their first buyer. Wash the plastic parts with warm water and soap, carefully drying all the components afterwards. [. . . ]