User manual JANE INDY TEAM PLUS

[. . . ] The child must understand that under no circumstances is he to play with the seat belts or the fastening elements. This seat is designed for use in the car and must not be used out of it. Stand, base Seat Headrest Strap to adjust headrest height 5-point buckle Harness tensor Shoulder strap Shoulder padding Crotch strap Isofix fasteners ISOfix state panel Testing button ISOfix state light Light battery dead ISOfix removal lever ISOfix unblocking buttons Anti-rotation strap (Top Tether) Top Tether hook Tensor Bag Tension indicator Vehicle abdominal seat belt guide Shoulder strap lock Shoulder strap ring Belt tensor lever Reclining adjustment lever Instructions compartment ISOfix guides Instruction manual Quick guide Parts of your vehicle Consisting of two distinguishable parts: 1a Sub-abdominal or shoulder part, that goes from the buckle over the chest and the shoulders 1b Abdominal part, this is the part that goes over the top of the legs 1c Buckle Two-point fastening seat belt. The INDY TEAM PLUS seat can not be installed with this type of seat belt. [. . . ] The fasteners are situated at the intersection between the seat and the Not all seats or all vehicles have these fasteners, consult your vehicle manual for more information. The manufacturer of your vehicle should have left some rings on the rear part of the seat to fasten the ISOfix anti-rotation system. Their location varies for each make and model, consult your vehicle manual to know where to find them. Features of your INDY TEAM PLUS seat The INDY TEAM PLUS seat has been designed with the latest advances in safety and comfort: 1. INDY TEAM PLUS can be installed with three-point seat belts or ISOfix fasteners. Therefore, as your child grows he will also have more space in the crotch area. The abdominal straps are used to tighten the harness of your INDY TEAM PLUS, while the majority of seats use the shoulder straps to do this. This improves performance in the event of a collision and also gives a longer strap to install your child. From time to time you should check that the fasteners are secured correctly. If the seat has been installed with a threepoint seat belt, INDY TEAM PLUS has a tensor. The ISOfix fasteners are secured to the seat by a pneumatic piston, this unique and patented system absorbs the shock of impact. The INDY TEAM PLUS seat is reclined by using a lever situated on the front part of the seat (19). To recline the seat, press the lever (19) and slide the seat into the required position. Any alteration or addition to the product without the express authorisation of JANÉ may seriously affect the safety of the retention system. If you do not carefully follow the instructions for the correct use of the retention system it may endanger your child's safety. This safety device must not be used without its upholstery, nor may it be replaced by another one that is not the original, as it forms an integral part of the safety characteristics of the system. Make sure that the seat belt has not got trapped between the folding seats or doors. DO NOT use the seat facing forwards for babies that weigh less than 9 Kg. In the vehicle make sure that all baggage as well as any other object that could cause injury in the event of an accident is duly secured or stored. The INDY TEAM PLUS seat should be duly fastened with the seat belts, even when it is not in use, as in the event of an accident it could be flung about causing injury to the occupants of the vehicle. Remember not to use the INDY TEAM PLUS seat in vehicles fitted with a frontal airbag, unless it can be disconnected or deactivated, which should be consulted with the vehicle manufacturer or retailer. Do not expose the upholstery to sunlight for long periods of time, while the seat is not in use cover it up or store it in the luggage compartment. [. . . ] Do not expose the upholstery to sunlight for long periods of time, while the seat is not in use cover it up or store it in the luggage compartment. Wash the plastic parts with soap and warm water, then carefully dry all the components. You can see the state of the ISOfix system by the lights on the front panel and hear it with the beeps it emits. The front panel has 3 leds, the sides (11b) indicate the state of the ISOfix fasteners: green if they are connected well (long beep), red if they are disconnected (intermittent beep). [. . . ]