User manual JANE ENERGY

[. . . ] It may be necessary to push the pushchair slightly for the brake to be fully activated. - UNFOLDING AND INITIAL ASSEMBLY Release the folding catch and open the chassis 1 and 2 until the main locks click into place. 3 Fit the 2 rear wheels onto the chassis 4 , pressing the central button on the wheel. Insert the front wheel pressing the button 5 Push the backrest until it is in the vertical position 6 Adjust the handles to the required height 7 8 and 8a When it is loose, pull the handle on the backrest upwards to release the front part. [. . . ] - HOW TO FIT THE HAMMOCK FACING FORWARDS WARNING: It is important to make sure that the child is kept away from the pushchair while it is being folded or unfolded. WARNING: The appearance of cutting, compression and pinch points are inevitable during these operations. Simultaneously fit the openings on both sides of the hammock into the front fasteners A1 10 and 10a Supporting the hammock in A1 lower the rear part of the hammock until it fits into the two rear fasteners A2 11 and 11a Make sure that the hammock is securely fastened to the chassis by gently pulling it upwards. - REVERSIBLE HAMMOCK FUNCTIONING Your pushchair has a reversible hammock so your child can sit facing forwards or facing you. When the child is small he will want to face you, and as he grows he will become more curious and want to face forwards. WARNING: Make sure that the hammock footrest is in the horizontal / parallel to the seat position, if not it gets caught between the tubes of the front legs and prevents the hammock from being correctly fastened to the chassis. - HOW TO FIT THE HAMMOCK FACING BACKWARDS Simultaneously fit the openings on both sides of the hammock into the rear fasteners A2 12 and 12a Supporting the hammock in A2 lower the rear part of the hammock until it fits into the two front fasteners A1 13 and 13a Make sure that the hammock is securely fastened to the chassis by gently pulling it upwards. - BRAKES Your pushchair has a brake system that works simultaneously on both rear wheels. Use it as a parking brake whenever possible, it is an important safety element. 22 To raise the backrest you don't need to use the lever, simply push the backrest to the required position. 23 The backrest has an extra 4th position that should only be used for folding the pushchair when the hammock is in place facing forwards. To put the backrest in this position pull the rear lever upwards and push the backrest forwards, until it is securely in place. WARNING: It is necessary to take the hammock off the buggy In order to connect any auto accessories. - ADJUSTING THE HAMMOCK FOOTREST The position of the footrest can also be adjusted to suit the child's posture at all times. Press button A situated on the frame, on both sides of the pushchair, while moving the footrest downwards. 7 To move it upwards you don't need to press the button, simply push the footrest. NOTE: To fold the pushchair with the hammock facing backwards the hood should be taken off and the backrest should not be put into the folding position. WARNING: Some of the parts may break if your try to fold the pushchair without releasing the front wheel steering lock. [. . . ] NOTE: To fold the pushchair with the hammock facing backwards the hood should be taken off and the backrest should not be put into the folding position. WARNING: Some of the parts may break if your try to fold the pushchair without releasing the front wheel steering lock. Recline the hammock, using the lever, until it is in the folding position. 5 Remove any object from the basket that may prevent the pushchair from folding correctly. [. . . ]