User manual JAMO MANNO33%2C+AT1A

[. . . ] AT-1A WARNING: Improper installation could result in damage to the amplifier. [. . . ] Connect the speaker output on the receiver/amplifier to the INPUT on the AT-1A. Connect the OUTPUT from the AT-1A to the left and right speakers When connecting speaker cables/wires from the amplifier to the AT-1A and from the AT-1A to the speakers make sure LEFT (L) is connected to LEFT (L), RIGHT (R) to RIGHT (R), POSITIVE (+) to POSITIVE (+) and NEGATIVE (-) to NEGATIVE (-). If terminals are colour coded, RED is POSITIVE (+) and BLACK is NEGATIVE (-). SET-UP Before turning on the amplifier turn the amplifier volume to minimum. Turn the amplifier on and slowly turn up the volume to the highest desired level without distortion from the speakers. The volume of the speakers are now controlled by the AT-1A and the amplifier volume control should not be used. The scope of the warranty The warranty period will come into force as from the purchase date stated on the invoice. The warranty will apply for the following period of time: · · 2 years for electronics (power supply, amplifier, etc. ) 7 years for other parts (cabinet, speaker units, etc. ) In case of warranty inquiries, please contact your dealer. In case of request for service under warranty, please enclose your original receipt. [. . . ] A replacement cannot exceed the value of the product under warranty. 69437 / 39. 2000 [. . . ]