User manual JAMO AT-101

[. . . ] AT-101 WARNING: Improper installation could result in damage to the amplifier. [. . . ] If terminals are colour coded, RED is POSITIVE (+) and BLACK is NEGATIVE (-). For installation of more than 1 pair of speakers see , , Impedance matching". SET-UP Before turning on the amplifier turn the amplifier volume to minimum. Turn the amplifier on and slowly turn up the volume to the highest desired level without distortion from the speakers. The volume of all speakers are now controlled by the AT-101(s) and the amplifier volume control should not be used. IMPEDANCE MATCHING 1. Identify the impedance of your speakers and the impedance requirements of your amplifier 2. The jumber settings are determined by the AT-101 with the largest numbers of speakers connected AT-101 JUMBER SETTINGS Each AT-101 in the system must have the same jumber setting when the tables below are used When using speakers with different impedances, consider all speakers to be the same as the lowest impedance speaker. Speaker impedance: 8 ohm (min) Amplifier impedance: 8 ohm (min) Speaker impedance: 8 ohm (min) Amplifier impedance: 4 ohm (min) Speaker impedance: 4 ohm (min) Amplifier impedance: 8 ohm (min) Speaker impedance: 4 ohm (min) Amplifier impedance: 4 ohm (min) NOTE: * = do not use The scope of the warranty The warranty period will come into force as from the purchase date stated on the invoice. The warranty will apply for the following period of time: · · 2 years for electronics (power supply, amplifier, etc. ) 7 years for other parts (cabinet, speaker units, etc. ) In case of warranty inquiries, please contact your dealer. [. . . ] A replacement cannot exceed the value of the product under warranty. 69448 / 51. 2000 [. . . ]