User manual JACUZZI POST AND RAIL STYLE SKIRT INSTALLATION INSTRUCTIONS

[. . . ] Post and Rail Style Skirt Installation Instructions Important: Read all instructions before beginning installation. [. . . ] Mount the shell clip to the wooden block located under the bath rim at the center of the rim. (As shown in illustration 1. ) The shell clip is to be located about 7/8" from the inside of the bath rim edge. Then drill pilot holes about 1/8" deep using a 3/32" drill bit. Insert posts under rim of bath corners in front of the wood blocks, as shown in illustration 2. Push top of posts against inside corners of the bath and fasten the tip of the posts to the wood blocks as shown using the metal brackets and fasteners provided. Check the vertical alignment of the posts with a level and fasten the bottom of the posts to the floor as shown. BATH RIM (Interior) SCREWS (PROVIDED) SHELL CLIP 1 Mount shell clip to rim at center of bath. 7/8" WOOD BLOCK AT CORNER OF BATH RIM POST (Right Hand side shown) the bottom of the skirt, 12" from each end and in the center, so that they will attach to the bottom rail when the skirt is installed. REMOVABLE SKIRT BRACKET SPEED NUT SCREW SCREW VELCRO® LOOP TAPE HOOK TAPE 12" BRACKET BOTTOM RAIL 2 Lay the bottom rail on the floor between the two vertical posts. [. . . ] Apply strips of Velcro® loop tape to Printed on Recycled Paper 5 ©1991 B243000 C 11/94 Printed in the U. S. A. [. . . ]