User manual JABRA TALK

[. . . ] 1 Put the headset in pairing mode - When you turn on your Jabra TALK for the first time, the headset will automatically start up in pairing mode – i. e. When the headset is in pairing mode the Bluetooth® status indication on the StatusDisplay™ is flashing. 2 Set your Bluetooth® phone to ‘discover’ the TALK - Follow your phone’s instruction guide. [. . . ] Depending on your phone settings, the person who called you will either be forwarded to your voice mail or will hear a busy signal. Make a call -  When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your headset. If your phone does not allow this feature, tap on the Jabra TALK’s answer/end button to transfer the call to the headset. Activate voice dialling* -  Press the answer/end button to activate the voice-dialing function in the mobile phone. Please consult your phone user manual for more info about using this feature. Redial last number* - Double tap the answer/end button when the headset is on and not used. Adjust sound and volume* - Tap the volume up or down to adjust the volume. Mute/un-mute - To mute, press both volume up and down at the same time. - To un-mute, tap either of the volume buttons. * Phone dependent JABRA TALK 7 ENGLISH Call waiting and placing a call on hold* - Press the answer/end button once to put the active call on hold and answer the waiting call. HOW THE STATUSDISPLAY™ WORKS Bluetooth® Indicator Indicates if your headset is connected to your phone -  olid light means headset is connected to your S phone -  lashing light means headset is in ‘pairing mode’ F and ready to be connected to a new phone Battery Indicator Indicates battery level and if headset is turned ON -  reen light indicates that the headset has more G than 30 minutes of talk time remaining -  ed light indicates that the headset has less R than 30 minutes of talk time remaining To save battery the Jabra StatusDisplay™ is turned off after 3 seconds. Get an instant status from the Jabra StatusDisplay™ by a tap on any button on the headset when you are not on a call. HOW THE VOICE GUIDANCE WORKS When your headset has established a connection to your phone (or other Bluetooth® device) the voice guidance will say “connected”. When your headset has less than 30 minutes talk time remaining the voice guidance will say “low battery”. When double tapping the MFB button on your headset to redial, the voice guidance will say ‘redialing. * Phone dependent JABRA TALK 8 ENGLISH - This lets you put a call on hold during a conversation and answer a waiting call. USING JABRA TALK WITH TWO MOBILE PHONES In order to use the headset with two mobile phone please make sure you have ”paired” the Jabra TALK with both phones. See the section “PAIRING IT WITH YOUR PHONE” for instructions. Once you have “paired” your headset with two phones simply make sure your headset is on, and that Bluetooth® is enabled on the phones and the headset will then automatically connect to both phones. [. . . ] 5 Standby mode is when the Jabra TALK is passively waiting for a call. When you ‘end’ a call on your mobile phone, the headset goes into standby mode. Dispose of the product according to local standards and regulations. www. jabra. com/weee JABRA TALK 12 ENGLISH © 2012 GN Netcom US, Inc. [. . . ]