User manual JABRA GN 2100

[. . . ] English A Flexible earhook B Flexible earloop C Headband ring D Adjustable headband E T-bar support F Headband Duo G Receiver H Microphone I Leatherette earcushion J Ear plate K Quick Disconnect L1 Boom arm, fixed L2 Boom arm, flex L3 Boom arm, micro Deutsch A Flexibler Ohrhaken B Flexibler Ohrring C Überkopfbügelring D Einstellbarer Überkopfbügel E T-Halter F Überkopfbügel Duo G Hörkapsel H Mikrofon I Leder-Ohrpolster J Ohrplatte K Schnellkupplung L1 Bügelarm, fest L2 Bügelarm, flexibel L3 Bügelarm, Mikro Français A Contour d'oreille souple B Anneaux d'oreille souple C L'anneau serre-tête D Serre-tête réglable E Support temporal F Serre-tête Duo All GN Netcom A/S products are designed and manufactured in accordance with strict quality standards and should, with a minimum of maintenance, give many years of satisfactory use. The information in this user guide is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by GN Netcom A/S. [. . . ] With your thumb, adjust the slider to fit the earloop to the size of your ear. For optimum performance, the microphone should be positioned less than 2 cm from your mouth. To change from left- to right-ear fitting, hold the earloop in your left hand and use your right hand to rotate the boom arm 180° away from the cord. Place the receiver on your ear, and then adjust the headband so the T-bar support is placed just above your free ear. To adjust, gently pull the headband to slide it smoothly in or out of the support piece. For optimum performance, the microphone should be positioned less than 2 cm from your mouth. To change from left- to right-ear fitting, hold the receiver with your left hand and with your right hand turn the boom arm up past the headband. Do not use unnecessary force: the boom arm stops when it cannot turn any further. This headset is ideal if you prefer sound in both ears so that you are not disturbed by sounds around you. To adjust, gently pull the headband to slide it smoothly in or out of the support piece. For optimum performance, the microphone should be positioned less than 2 cm from your mouth. The microphone boom arm can be positioned either on your left side or your right side. [. . . ] The stainless steel alloy has been tested for nickel release in accordance with the European standard EN 1811:1998. According to EU Directive 94/27/EF, the nickel release must be below 0, 50µgram/cm2/week. [. . . ]