User manual JABRA EHS BROCHURE

[. . . ] 9 Sound economics Improvement in employee productivity significantly outweighs the headsets costs. The average cost of a wireless headset solution is less than 25 pence per day. Discover freedom with a wireless Jabra headset optimized for your desk phone!Jabra Electronic Hook Switch (EHS) provides a solution that enable remote operation, e. g. answer/end functions, of compatible Jabra wireless headsets with various phones, thus eliminating the need for a mechanical handset lifter. solution they can roam within the facility and still do business on the spot! [. . . ] Set the base unit to the DHSG mode by keeping the headset in the base and hold the volume +/- buttons on the headset for 6 seconds until the red light on the base flashes rapidly. Scroll through the four different settings using +/- and set to the lips icon. Leave for 15 seconds until the unit has displayed the confirmation flash sequence and it is ready to go! ­ + Volume button Jabra LiNkTM 14201-19 eHs adapter for avaya Jabra LiNkTM 14201-20 eHs adapter for avaya or or or Jabra ProTM 9400 series Jabra goTM 6470 Jabra gN9350e/ Jabra gN9330e eHs Jabra gN9120/ Jabra gN9125 eHs Setting up Jabra GN9330e EhS 1. Push simultaneously 5 sec on the 2 buttons (base station and headset ­ see illustrations next column) 3. Push simultaneously 5 sec on the 2 buttons (base station and headset ­ see illustrations next column) 3. regional sales contacts: Americas: Bill Orlansky, borlansky@gn. com EMEA: Norbert Lohwieser, nlohwieser@gn. com APAC: Mike Powrie, mpowrie@gn. com Setting up Jabra GN9120/GN9125 EhS 1. Set compatibility selector (Telephone Termination Switch Wheel) in position "A" 2. Set the base unit to the DHSG mode by keeping the headset in the base and hold the volume +/- buttons on the headset for 6 seconds until the red light on the base flashes rapidly. Scroll through the four different settings using +/- and set to the lips icon. Leave for 15 seconds until the unit has displayed the confirmation flash sequence and it is ready to go! ­ + Volume button MSH RHL DHSG AEI Visual indicator (red) Link icon Mute icon Charge icon For more information and disclaimer, visit www. jabra. com/cisco 7 electronic Hook switch (eHs) solutions for Nortel SuPPOrtEd NOrtEl IP PhONES SEt uP INFOrmatION To connect your Nortel phone and Jabra headset, just follow these simple steps: Nortel iP phone 1120e Nortel iP phone 1140e Nortel iP phone 1150e Setting up the Nortel phone 1. In the "Preferences" menu, choose "Headsets. . . " 2. In "Active Headset Device" select the appropriate headset type from a list of Wired, USB, or Bluetooth headsets. Selection of a particular headset type fine tunes the audio to that particular headsets type. Selecting the right headset type is therefore recommended to achieve best performance. EHS functionality operates in PC/computer mode of Jabra GN9350e, not phone mode. Usb ­ Usb cable included with the headset or Jabra gN9350e Jabra gN9330e Usb Usb connection Phone to Headset see tHe Last Page for order iNfo The Jabra GN9350e series were verified as compatible with Nortel phones: 1120E, 1140E and 1150E in a controlled laboratory environment. Visit the Nortel website to view important legal notices about Compatible Products. *UNIStim firmware release 3. 1 for IP Phones is available for download from the "Software Download" link under "Support and Training" on the Nortel website located at: http://support. nortel. com. The firmware is available by phone model under "Phones, Clients and Accessories". These firmware loads have not been introduced as the default loads for the IP Phones shipped from Nortel, and must be installed by your system administrator. For more information visit www. jabra. com/nortel regional sales contacts: Americas: Bill Orlansky, borlansky@gn. com EMEA: Norbert Lohwieser, nlohwieser@gn. com APAC: Mike Powrie, mpowrie@gn. com 8 ARENA Partner Platinum APP ARENA Partner Platinum APP electronic Hook switch (eHs) solutions for Polycom SuPPOrtEd POlycOm IP PhONES SEt uP INFOrmatION simple steps: AR ENA Partner Gold APP AR ENA Partner Gold APP ARENA Partner Silver ARENA Partner Silver APP To connect your Polycom phone and Jabra headset with the EHS Adapter, just follow these APP soundPoint® iP 650 phone soundPoint® iP 560 phone soundPoint® iP 550 phone soundPoint® iP 430/450 phone APP Setting up the Polycom phone ARENA Partner Associate APP 1. Select Settings>Basic>Preferences>Head-set>Analog Headset Mode. Use the up and down arrow keys to select Jabra Mode, then press the Select soft key. Press "Menu" or the exit soft key to return to the idle display. ARENA Partner Associate Setting up Jabra PrO 9400 and Jabra GO 6400 - follow the guide on page 11. soundPoint® iP 320/330* phone soundPoint® iP 670 phone VVX 1500 phone Setting up Jabra GN9350e series 1. [. . . ] Ensure your headset base unit EHS mode is set up to DHSG see headset manual*. With the cable included with your headset system, connect the phone socket in your headset base unit to the phone socket on your Jabra Link EHS Adapter. With the cable marked white A, B, or C, connect the Headset / Handset socket on your Jabra LINK EHS Adapter to the headset socket on your desk phone ensure you select the right cable for your Avaya desktop phone. With the cable marked purple, connect the 2. 5 mm jack to the ring tone detector socket in the Jabra Link EHS alcatel IP touch Extended edition 4028 4038 4068 - cable marked: d white - cable marked: red - cable marked: a orange - telephone cord** ** Cable included in headset pack using dictaphone output The dictaphone output can be used to record a conversation in both directions. [. . . ]