User manual ITS TELECOM PANCODE VOIP INSTALLATION AND PROGRAMMING V2 RELEASE 11

[. . . ] Pancode VoIP Pantel VoIP Access Control Door Phones Installation and Programming Manual Version 2 Release 11 ed2 September 2010 Pancode VoIP/Pantel VoIP Access Control Door Phones Installation and Programming Manual NOTICE This publication refers to the PANCODE IP and Pantel IP Door Access Control devices, Firmware Version 2. xx. Reproduction of this manual or parts thereof without written permission from ITS is strictly prohibited. reserves the right to modify the hardware and software described herein without prior notice. However, changes made to the hardware or software described do not necessarily render this publication invalid. WARRANTY In the event that the product proves to be defective in workmanship or materials within a period of one year from date of shipment, ITS Ltd. [. . . ] For the Windows XP: Control Panel Relevant Local Area Connection button Select the "Use the following IP address " option Enter Network parameters as shown as example on the following figure. Properties Network connections Press Properties Select Internet Protocol (TCP/IP) 29 Pancode VoIP/Pantel VoIP Access Control Door Phones Installation and Programming Manual Figure 5-2 PC Network parameters for the Gross-linked cable connection Press OK exit from the PC Network settings and enter to the Pancode IP first web-programming Don't forget to return the Administrator's PC network settings to the local network required after the first Pancode IP programming session will be finished. __________________________________________________________________________________________ The programming application is launched from the web browser (preferably MS Internet Explorer version 5. 5 or higher). It is possible to run the application by typing the following address in the address bar: http://XXX. XXX. XXX. XXX/pancode (Figure 5-3). Figure 5-3. ITS Pancode IP Web Page 5. 1 Searching for a Device in LAN When the IP address is unknown, it is possible to find the unit in the LAN using the QUERY utility from the installation CD. 30 Pancode VoIP/Pantel VoIP Access Control Door Phones Installation and Programming Manual Unit location through a query is possible only when the unit MAC address is known. Use Lower Case only for letters which presents in the MAC address To find the unit in the network: a. Insert the installation CD and copy the query. exe file from the Software directory to the local hard drive. b. Access the directory, in which the query. exe application exists. d. Enter the following command: query XX:XX:XX:XX:XX + <Enter>, where XX:XX:XX:XX:XX is the MAC address. A search for the device takes place, at the end of which the unit IP address appears (Figure 5-4). Figure 5-4. Searching for Device Using Query 31 Pancode VoIP/Pantel VoIP Access Control Door Phones Installation and Programming Manual 5. 2 Scanning for a Device in the Network When the unit MAC address is unknown, it is possible to find an existing device in the network using the SCAN utility from the installation CD. SCAN utility required for any OS Windows based network capturing utility installation. For example: The Wireshark utility which can be downloaded from the link http://www. wireshark. org/download. html To find a device in the network: a. Insert the installation CD and copy the scan. exe file from the Software directory to the local hard drive. b. Disconnect the Pancode VoIP/Pantel VoIP from the external power supply. A scan takes place, at the end of which the installed PC Ethernet adaptor appears (Figure 5-). Figure 5-3. A scan for the device takes place, at the end of which the detected Pancode/Pantel device IP information, including MAC address and network settings, appears (Figure 5-). Figure 5-4. Search Results for Device in the Network 32 Pancode VoIP/Pantel VoIP Access Control Door Phones Installation and Programming Manual 5. 3 Application Interface When running the application, the login screen appears: Figure 5-5 Web GUI login screen Type `Login' as User name and `Password' in order to enter to programming screens. 1. The default `Login' value is `admin' and default `Password' value is `admin' 2. Very recommended to change default login parameters in order to increase device's security level. After then login information accepted the main screen opens, comprising the navigation menu, parameters fields and functional buttons (Figure 5-6). 33 Pancode VoIP/Pantel VoIP Access Control Door Phones Installation and Programming Manual Figure 5-6. Application Interface The navigation menu contains the following items: System Authorization parameters Local network parameters Proxy server parameters Codec Type Volume settings Time mode DHCP support Dialing mode Door opening time Auto Answer mode Video Camera operational mode (optional*) * Video camera operational mode depends on the Door Unit's hardware configuration. 34 Pancode VoIP/Pantel VoIP Access Control Door Phones Installation and Programming Manual VoIP Dialing Settings Speed dialing mode Door Access Codes Speed dialing mode destination numbers Regular (Normal) Direct dialing mode First digits of Extensions Regular (Normal) dialing mode Door Access Codes Call Button definitions Door opening from extension code No answer timeout The Main Parameters screen contains the following operational buttons: Submit Reset to default Reboot Upload Config File Save Config File Upload modified settings to the Door Unit Reset Door Unit to the factory default settings Restarts the Door Unit Upload previously saved Door Units configuration file. ( Note: Saved file renamed to Config. CFG) Save existing Door Panel configuration as file on local PC drive (the existing configuration file will be saved with extension Config. SAV. For uploading this file need to rename saved file to extension Config. CFG) Activate the updating of the Door Unit's internal firmware. [. . . ] Peer IP Address Peer Mode Specify the target Peer device's IP address when Peer mode is activated. Specify the following type of operation: Visitor dials any free up to 3 digits number and IP Door panel try to establish SIP connection with the target Peer device, where dialed digits used as fourth quarter of the IP address. For example: Peer IP Address is 192. 168. 21. XXX, where last XXX digits are insignificant. Door panel started to establish connection with the IP address 192. 168. 21. 151 Time interval, when a call will be forwarded to the another destination specified in the Call Button Destination Forward no Answer parameter when destination dialed by visitor did not answer. [. . . ]