User manual ITI SIMON

[. . . ] S I M O N O W N E R 'S M A N U A L 1 FCC Notices FCC Part 15 Information to the User Changes or modifications not expressly approved by Interactive Technologies, Inc. can void the user's authority to operate the equipment. FCC Part 15 Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] DISARM Press once and enter your access code using the NUMERIC buttons to turn security protection off. ON Light button Press twice quickly to activate all lights controlled by the security system. You may turn on specific lights and appliances by pressing this button once and entering the unit number of a light or appliance using the NUMERIC buttons. You may turn off specific lights and appliances by pressing this button once and entering the unit number of the light or appliance. EMERGENCY Press both EMERGENCY buttons for 3 seconds to cause the system to call a central monitoring station to report a non-medical emergency. 1 4 7 On 2 5 8 3 6 9 Off EMERGENCY - Press & Hold Both K eys 8988G07B. DS4 KeyChain Touchpad LOCK Press once to arm doors and windows. LOCK Press 3 times to arm doors, windows, Motion Sensors, and to activate the Latchkey option. Entering your home If your installer programmed the KeyChain Touchpad with no entry delay, and you armed the system with the KeyChain Touchpad, you must disarm your system from outside of the home to avoid causing an alarm. Exiting your home You have at least 5 seconds and up to 120 seconds (depending on installer programming) to leave without causing an alarm. LOCK and UNLOCK Press both buttons simultaneously for 3 seconds to send an intrusion, silent, or non-medical emergency alarm to the central monitoring station. 8348G03A. DS4 UNLOCK Press to disarm your security system. STAR Press to open or close your garage door, if programmed, or your system may be programmed to turn on a light using this button. For any keypress on the KeyChain Touchpad, hold the button until the indicator light blinks. 10 Programming Your System What You Can Change: Options: Press Add in the START MENU and follow the voice prompts to turn an option on. Option 01 - Panel Beeps Panel Beeps are any beeps (including chime beeps) that come from the Control Panel. Option 02 - Panel Voice Panel Voice may be disabled, except for status messages, open sensor responses, and when in program mode. Option 03 - Latchkey Time Adding this option allows you to program Latchkey Time. Latchkey is used to notify parents if children do not arrive home at a predetermined time and disarm the system. Option 36 - Sensor Activated Light Lockout Start Time Option 37 - Sensor Activated Light Lockout Stop Time (Not for use with Basic Model) The Control Panel will not turn on a light which is activated by a sensor, even if sensor activated lights are enabled, between the programmed start time (option 36) and the programmed stop time (option 37). Option 41 - Voice Chime The Control Panel will verbally announce which chime sensor has been tripped if the chime feature is on. Option 42 - Speaker Level (Not for use with Basic Model) Turn the Control Panel speaker level to the high voice level when the option is turned on or turn the speaker level to the low voice level when turned off. Option 43 - Pager Phone Number Up to 22 digits, including pauses, may be programmed for the pager phone number. Add 3 or 4 pauses to the end of the phone number to ensure the complete pager message will be received. The Control Panel will call the pager to indicate: · No activity - The no activity time period is programmed by your installer. A no activity alarm is called in if the programmed amount of time passes, the Control Panel is subdisarmed, disarmed, or doors and windows armed, and no activity has occurred (a key has not been pressed or a sensor has not been tripped). Latchkey - A latchkey report is called when the system · · is not disarmed by a predetermined time. [. . . ] If the test is successful the Control Panel will say Phone test ok within 3 minutes. The Control Panel will say Phone test is on three times if you have a pager. Your pager will display 101 101 if the phone test to the pager was successful. If the test is unsuccessful, the SYSTEM STATUS button will light and the Control Panel will say Phone communication failure within 10 minutes. [. . . ]