User manual IROX TR119

[. . . ] It measures indoor temperature and humidity, and displays weather data collected by the remote weather sensors. It also provides indication of the indoor/outdoor temperature, pressure and humidity trends, and celestial information such as moon phase, and sunrise/set times. The main console unit stores around 3300 weather records without a computer connection. When linked to a computer using the USB cable (incl. ) and software (free download from internet), an unlimited number of weather records can be displayed and saved onto the computer. [. . . ] In Pressure and Weather Forecast Mode, press and hold [ ALARM ], or press on the remote control to toggle the bar-chart between: - Sea-level pressure ("PRESSURE" should be displayed) - Temperature (Thermometer icon and "CH1" should be displayed) - Humidity (RH icon and "CH1" should be displayed) Viewing Moon Phase History and Forecast 1. View Moon Phase History / Forecast: Press UP or DOWN to choose number of days forward (+ days) or backward (- days) from current date. Otherwise, if no buttons are pressed for 5s the display automatically returns to Pressure and Weather Forecast Mode. 16 Understanding the Weather Forecast Display Display Weather Forecast Status Sunny Partly Cloudy Cloudy Rain Unstable Weather Snow NOTE: 1. The accuracy of a general pressure-based weather forecast is about 70%. The "Sunny" icon, as applies to night time, implies clear weather. Understanding the Moon Phase Diagram FULL LAST NEW FRIST UV Mode The current UV intensity is indicated by both its numerical value and a more intuitive display. , by categorizing it into the levels "LOW", "MED", HIGH", V. It is also represented by a face icon that corresponds to the different levels. The main console unit records the daily and weekly maximum UV intensity. Accessing UV Mode From the main console unit: Press UP or DOWN until the UV icon flashing. on the display starts 17 Uv table and display UV-Index Symbol Level Intensity Protection 0 -2. 9 3 - 5. 9 6 - 7. 9 8 - 10. 9 11+ weak medium high very high extreme No protection necessary Protection necessary: Hat, t-shirt, sun glasses, sun cream Protection necessary: Hat, t-shirt, sun glasses, sun cream Additional protection necessary: Avoid to stay in unprotected areas Additional protection necessary: Avoid to stay in unprotected areas Resetting the UV Statistics Memory In UV Mode, press and hold MEM or MEMORY to reset all UV statistics. Setting Units for UV Display (MED/h or UVI) In UV Mode, press and hold SET to convert units between MED/h and UVI. Disabling/Entering Snooze when Time Alarms are Activated To Enter Snooze: Press LIGHT/SNOOZE to enable snooze function. Note: Alarm will automatically enter snooze mode if no key is pressed after the alarm sounds for 2 minutes. Note: For weekday alarm, pressing ALARM will only disable the alarm for the current day. The alarm will be activated again the next day (if it falls within Monday to Friday). Activating/Deactivating Radio Clock Reception The main console unit synchronizes the time and date with radio clock broadcasts to maintain atomic clock precision. If RC reception is activated, a triangular tower icon will start flashing beside the clock icon. If RC reception is deactivated, the triangular tower icon will disappear. Icon (Flashing) RC Reception Strength Undefined data Reception failed for 24 hours Weak signal, but can be decoded Strong signal 20 Note: The radio controlled signal for time (HBG) is transmitted from the central atomic clock in Frankfurt/Main in short intervals. Sunrise/Sunset Mode The main console unit computes the sunrise and sunset times from the user-configured location data. This includes the longitude, latitude, time zone and DST (Daylight Saving Time). Choosing a suitable city code for your area will automatically generate the correct values for the location data. Should you wish to input your own location data or if a suitable city code could not be found, choose "USR" as the city code during setup. [. . . ] Anemometer -Check that the wind vane and wind cups can spin freely and are free from dirt, debris or spider webs. Rain Sensor Like all rain gauges, the rain sensor is prone to blockages due to its funnel shape. Checking and cleaning the rain sensor from time to time will maintain the accuracy of rain measurements. Remove any dirt, leaves or debris by cleaning the items with soapy water and a damp cloth. [. . . ]