User manual IROX SPIN

[. . . ] Peel off the protective paper on the sticker pad for attaching the bracket on a wall. Slide the thermo-hygrometer down into the holder unit until it locks into place. [. . . ] NOTE Do not place the thermo-hygrometer in direct sunlight or in area exposed to heavy saturation. When handled properly, this unit is engineered to give you years of satisfactory service. If the unit comes in contact with water, dry it immediately with a soft lint-free cloth. Do not clean the unit with alcohol containing detergent, abrasive or corrosive materials. Abrasive cleaning agents may scratch the plastic parts and corrode the electronic circuit. Do not subject the unit to excessive force, shock, dust, temperature, or humidity. The contents of this manual and the product specifications are subject to change without further notice. ⷠThe technical specifications of this product are subject to change without notice. ⷠThe contents of this manual may not be reproduced without the permission of the manufacturer. The thermo-hygrometer is powered by one piece UM-4 or AAA size battery. When you install or replace the battery, it takes time to reset both the temperature and humidity data. The display will show `---°C' and `88%' for 1 to 2 seconds, then it shows the updated temperature and humidity reading. [. . . ] When you install or replace the battery, it takes time to reset both the temperature and humidity data. The display will show `---°C' and `88%' for 1 to 2 seconds, then it shows the updated temperature and humidity reading. [. . . ]