User manual IROX FLIP99

[. . . ] 12. 00 will then appear in the display and a short series of sounds will be heard. Should this not be the case, please reinsert the batteries again and activate the RESET contact at the bottom of the device with a sharp object (e. g. If this does not help, please check that the batteries are fully charged. [. . . ] The flashing month can be set with the upwards `' or downwards `' key. The flashing day can be set with the upwards `' or downwards `' key. - The weekday is set automatically via the calendar - Press the `S' key again to confirm the date set and to exit the setting mode. 6- WAKE-UP TIME SETTING (in the display mode AL) Press and hold the `S' key for approx. - The flashing hours number of the wake-up time can be set with the upwards `' or downwards `' key. - Press the `S' key briefly: The flashing minutes number can be set with the upwards `' or downwards `' key. - Press the `S' key again to confirm the wake-up time set and to exit the setting mode. If the symbol does not appear on the display, the alarm is deactivated. Press the upwards `' or downwards `' key in the AL display to select one of the melodies or also to select the `beep' wake-up sound again. When the alarm time has been reached and the alarm clock is activated as described above, the wake-up call or melody sounds out and the coloured light changes colour to the rhythm of the melody. If you do not want this, the alarm clock needs to be deactivated as described above with the `S' key. 7- TIMER SETTING (in the display mode TIMER) Press and hold the `S' key for approx. - The flashing minutes number can be set with the upwards `' or downwards `' key. The flashing seconds number can be set with the upwards `' or downwards `' key. - Press the `S' key again to confirm the setting and to exit the setting mode. To start the timer which has been set in this way, press the `S' key briefly. [. . . ] With any abnormalities, first try resetting the device, i. e. : You press with a needle or an opened-up paper clip into the small hole `RESET' on the bottom of the device. The device then goes back into the manufacturer position and you can begin reprogramming. 11- SUPPORT This device is a new development of Irox Development Technology. All information was made and checked by means of a functioning instrument. [. . . ]