User manual IROX EBR808CL

[. . . ] [ LIGHT/SNOOZE] is contactless key sensing by an IR motion sensor IR motion sensor is placed between the crystal and LCD display to detect a motion up to 3 inches distance. When triggered, activate backlight for 16 seconds (24 seconds if with adaptor) or stop alarm temperately for 5 minutes when alarm sounds; 2. [. . . ] The LED on the front panel will start flashing at a rate of one time per around 2 seconds indicates channel-1 is in use. While the LED is flashing, press once the [CH] key will change the sensor channel setting to 2. Note: If user does not press any key for 10 seconds, it will exit the channel setting mode and transmit the RF signal. (If the transmitter has the LCD display, the C/F key will toggle the temperature unit on the LCD. ) As the channel 4 & 5 are reserved for other models, please never set the remote sensor to channel 4 & 5. rEMOTE CHANNEL AUTO-SCROLLING This device is equipped with an auto-scroll function. While the auto-scroll function is set, the unit will automatically cycle to display the temperature of each remote sensor for 6 seconds. To retrieve manually the specific sensor temperature reading, press CHANNEL key until desired channel number is displayed. Until auto scroll icon appears on the left hand corner of the 3rd line display. DCF 77 RADIO CONTROLLED CLOCK The built-in radio controlled clock is designed to synchronize the time automatically once the unit is brought within the range of the Frankfurt DCF 77 radio signal. When the unit is receiving the signal, the radio reception " " icon will start flashing and during this reception all manual settings are disabled. The time reception may take, depending on the signal strength, up to 10 minutes. [. . . ] The weather forecast is solely calculated on the basis of barometric air pressure changes. The probability of a correct weather forecast is approximately 70% and is valid for and area of approx. [. . . ]