User manual IROX CUBO

[. . . ] Description of buttons [ SNOOZE/LIGHT ] button Activates the snooze function when an alarm goes off; or turn on the backlight for 5 seconds [ MODE ] Button Toggle between clock and calendar display Hr:Min sec à Hr:Min dd à Day-Mon dd Where dd = day of week Press and hold 2 seconds to enter the setting mode for clock and calendar 12/24HR à HR à MIN à YR à D-M /M-D à Month à Date à Language à°C/°F à exit [ ALARM ] Button Toggle between Alarm and Clock mode; Press and hold 2 seconds to enter the setting mode for ALARM [ ] button Increases the value of a setting Enable or disable the alarm when in Alarm display mode [ ] button Decreases the value of a setting Activates manual synchanization for radio frequency [ RESET ] button (inside battery compartment) To activate system reset during abnormal condition. [. . . ] Use [ ] or [ ] button to select 12 or 24 hour format, then press [MODE] button to confirm. Repeat the same procedures to enter minutes, Year (range from 2005 to 2099), Date/Month or Month/Date format, current Month or Date (Weekday auto selection), languages and °C or °F selection. Press [ALARM] button once to switch from clock mode to display the alarm time, press again to switch back to clock time display 2. Press & hold [ALARM] button 2 seconds to enter alarm setting mode. When the alarm is beeping, press [SNOOZE/LIGHT] button once to temporarily stop the alarm for 10 minutes. Press [ ] button in alarm time display mode to turn off the "%" bell icon and inactive the alarm time. It is not necessary and not possible to adjust the altitude of the weather station. After the initial start-up of the weather station, a first forecast will be made within the first 24 hours of operation. [. . . ] You'll have to wait up to 24 hours so that the weather station can calculate a new forecast based on the conditions at the new location. [. . . ]