User manual IRIVER H300

[. . . ] Instruction Manual PORTABLE STORAGE DEVICE & MULTI - CODEC JUKEBOX Model H300 Series Model H300 Series Thank you for your purchase. Please read this manual carefully before using your new player. http://www. iRiver. com Thank your for your iRiver purchase. It is important that you read the manual to ensure that you get the most out of your new player. iRiver website address is www. iriver. com. The site provides product information and customer support. 1 iRiver Limited reserves all patents, trademarks, copyrights, and other intellectual rights regarding the user manual. [. . . ] button again to resume the recording. Recording FM radio broadcasting Press the button while receiving FM radio to begin recording. Press the Press the buttons to select the next / previous channel. Use the buttons again until the desired channel is selected. button while recording to end the recording. [Note] Volume control is disabled while recording. The recorded file is saved as 'RECORD\AUDIO\TUNERXXX. MP3' 44 45 Recording Recording Press and hold the the functions menu. button to open [Note] The option (Bitrate/Input Volume/Output Volume) value for each source for the recording is saved. It is also possible to change the preset options for each Source option for recording. MIC: Voice using an external microphone TUNER: Record FM radio Bitrate Quality of the recording. Output Volume(0~40) The product supports monitoring of the recording sound. This option changes the monitoring volume and does not affect the recording file. Use the buttons to select the Record icon then press the button to open the record standby screen. Use the buttons to select an option and use the buttons to change the Bit rate, Input Volume, or Output Volume. Press the button to return to the Recording Standby display from the Record Setting display. Press the button to start the MP3 recording. Press the screen. button in the record standby screen to open the Record Setting Press and hold the buttons in the Record Setting screen to select the Source item. Setting the Source option will change Bit rate, Input Volume, and Output Volume accordingly. 20 [Note] Volume control is not available while recording For best results, experiment with various volume settings and microphone distances in each setting you record in. 46 47 Press the displayed. button to finish the recording. The recording standby screen is Using the text function Store txt files to the TEXT folder Any text can be entered into a text file, including useful features such as book sections or addresses and phone numbers. Click Start -> Programs -> Accessories -> Windows Explorer. [Note] Press the button again in standby mode to record into a new file. The recording will automatically stop in the following conditions: - Not enough space is available for the recording. - Over 5 hours have been recorded - Insufficient battery Playing the recorded file Press the button in recording standby mode to play the recorded file Use Windows Explorer to create a folder named TEXT in the H300 drive. [Note] The recorded file is saved in the following location, depending on the Source. LINE IN : RECORD\AUDIO\AUDIOXXX. MP3 TUNER: RECORD\AUDIO\TUNERXXX. MP3 INT/EXT MIC : RECORD\VOICE\VOICEXXX. MP3 Press the button to pause the playback. To resume playback, press the button again. Store . txt files to the TEXT folder. 48 49 [Note] Only Wan-Sung type Korean text files are supported. To use a Jo-Hap type Korean text file, please convert it to a Wan-Sung type before using it. Text Browsing Normal Browsing Press the buttons to browse to the Previous/Next line while reading a text file. Press the buttons to browse to the Previous/Next page while reading a text file. Viewing text Press and hold the button in playback standby mode or in the radio screen to open the function menu. GO TO Browsing Use the buttons to select the Text icon then press the button to open the Text screen. Press the button to go to a desired location while reading a text file. Use the buttons to select a desired location. Use the buttons to select the desired folder or file and press the button to select. Press the buttons to select a desired number Press the button to go to the new location. [Note] Press the button to exit the text function. The maximum number of characters that can be displayed in the screen is: English: 26 characters per line, 10 lines. [. . . ] Press the button to confirm. The voice recording mode will automatically pause during silence. This is useful for recording over a long period of time to save memory. Level : Set the relative level of sound needed to activate the recorder. Set to 00 to disable Voice Detect Sec : Set the number of seconds of silence to record before pausing. [. . . ]