User manual IRIVER H140

[. . . ] Instruction Manual PORTABLE STORAGE DEVICE & MULTI - CODEC JUKE BOX Model H140 Model H140 Thank you for your purchase. Please read this manual carefully before using your new player. http://www. iRiverAmerica. com http://www. iRiverAmerica. com THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] To go to specific position (Useful for large files. ) Click the NAVI/MENU button to move the desired position of the text. Push , lever to select the desired Digit. H140 H140 Push Push , lever to move to the next page during reading the text. , lever to select the desired numeral. Click the NAVI/MENU button. The TEXT goes to the selected position. H140 NOTE 28 The number displayed is the Kilobyte size and Kilobyte location in the text file. 29 OPERATING THE FM TUNER While playing an Audio File, Press and hold the PLAY/PAUSE button. MEMORY FUNCTION (Save stations manually) Select a station by pushing the or switch to the left or the right. The FM function picture displays on the LCD. Push the or button to select FM frequency. Push or and select the desired station to save the station to. again Save complete Select CH02 Press the STEREO/PLAY/PAUSE button to select Stereo/Mono. will exit the memory function without saving. SELECTING FREQUENCY To change frequency, push the or Auto Scan function: To select a station to store, press the NAVI/MENU button to exit Preset mode and find a station by using or . Exit Preset Up to 20 stations can be stored. or switch to the left or the right. AUTO MEMORY FUNCTION (Save stations automatically) Automatically select station and save them in sequential order. Press the NAVI/MENU button to exit the Preset mode. or PRESET Mode : To select a station saved in memory, press the NAVI/MENU button or switch. Select a stored station by using the Press and hold the A-B/MODE button. Up to 20 stations will be stored in channels 1~20 automatically. Note: The Auto Memory Function may not function well in weak transmission areas. 30 31 MEMORY DELETE FUNCTION (Delete saved channels) Select the channel to be deleted at preset mode. Press and hold the memory button. RECORDING Press the REC button to activate recording standby mode. - The next channel will appear when channel deletion is completed. While in Preset mode, Auto Scan and Auto Memory functions are not available. When the player does not have any preset channels, EMPTY will be blinking at preset mode. Press A-B/MODE button or push the REC switch toward SOURCE/TYPE to select the source to record - To record voice with internal microphone : INT. MIC - To record voice with the external microphone: EXT. MIC - To record from an external audio device with an Optical Out: OPTICAL. - To record from an external audio device with a standard Line Out or Headphone jack: LINE-IN CONNECTING THE PLAYER TO EXTERNAL AUDIO SOURCE Connect the stereo cable to the LINE IN jack on the H140 and to the LINE OUT or Headphone jack of an external audio device. If the external audio device has an Optical output, connect an Optical cable to the Optical Out jack on the external device and to the Optical In jack on the H140. When recording by using the external microphone, connect the external microphone to the Line-In jack. Push the MENU/NAVI handle toward or , or push the REC button on the remote control toward SOURCE/TYPE to select FILE TYPE to save. 32 33 Push the MENU/NAVI handle toward or , or push the REC button on the remote control toward BITRATE to select BITRATE TYPE to set recording quality. This is only for MP3 file. TO PAUSE RECORDING During recording, press REC button to pause recording, press REC button again to start recording. TO STOP RECORDING At recording standby mode, press and hold mode. (44. 1 KHz, 16Bit, Stereo) When saving the optical signal with 48KHz as WAV file, the Bitrate is 1536Kbps. When recording from an external audio device, be sure to start the playback on that device when recording on to the H140. Recorded files are stored in folders matching the source name from where the audio was recorded. - Line In/Optical In : ROOT\RECORD\AUDIO\AUDIOXXX. MP3(WAV) - INT/EXT Mic : ROOT\RECORD\VOICE\VOICEXXX. MP3(WAV) Recording is automatically stopped if: - The H140's memory is full. - When the recorded MP3 file size is over 195MB - When the recorded WAV file size is over 795MB - The recorded time is longer than 5 hours. - When sampling rate is changed during optical recording Caution Optical recording can sample at 44. 1KHz or 48KHz. It is important to match the recording sampling rate with the playback sampling rate of your optical output device. Note, when the player is is Record Standby Mode, it will automatically shut off according to the "STOP POWER OFF" setting (Refer to page 43). button to go previous NOTE Volume level can not be controlled on the H140 while recording from an external device. While recording, press (STOP/PWR OFF) to stop recording and switch to recording standby mode. [. . . ] Preventing hearing damage Avoid using headphones/earphones at high volume. Hearing experts advise against listening to continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use. This will allow you to hear outside sound and to be considerate of the people around you. 50 51 Should any problem persist after you have checked these symptoms, consult your iRiver dealer or contact support at iRiver. com. No Power Remote Control Headphones and foam covers Check whether the battery is discharged. [. . . ]