User manual IQBOARD PS

[. . . ] IQBoard ET & PS User Manual Copyright(C) 2003-2010 Fuzhou Returnstar Technology Co. , Ltd. Web: www. recoverystar. com; www. iqboard. net Tel: 0086-591-87274373 Fax: 0086-591-87274383 E-mail: master@recoverystar. com Important Statements This manual is for IQBoard ET and IQBoard PS. The "Whiteboard" or "Interactive Whiteboard" in this manual all refer to IQBoard ET or IQBoard PS. The "Electronic Pen" and "Electronic Pointer" are used for IQBoard ET. [. . . ] When setting the soft hotkeys, if some error occurs, you can press "ESC" key on the keyboard to exit the setting process, and then reset the hotkeys. You don't need to set the hard hotkeys. 6. 3 Enable Touch Recognition Touch Recognition allows the whiteboard to sense the difference between a pen, finger and palm of the hand. You can write and draw with the pen, move objects with your finger, and erase with the palm of your hand all at the same time -- no tool switching required. To determine whether your interactive whiteboard supports Touch Recognition, please refer to About Model. To enable Touch Recognition function 1. Select "Start > Programs > IQBoard ET & PS Drivers >Touch Recognition Setting". When using this function, if the whiteboard often misinterprets your intent, you can customize Touch Recognition's sensitivity to suit your style. Before set up touch recognition function, please specify the whiteboard size. Every time you touch the whiteboard with your pen, finger or palm, the whiteboard acquires a value, based on which one of the 3 functions will be performed: Write, Select and Erase. The wider the value range, the easier you can perform the related function. Test the Touch Recognition's sensitivity by pressing the testing area with pen, your finger and palm. If the whiteboard misinterprets your intent, adjust the sliders as detailed above. Click "Ok" to save your settings. To reset Touch Recognition's sensitivity to default settings, click "Defaults". Chapter 7 Use IQBoard 7. 1 Basic Operations For IQBoard PS, you can use the enclosed writing pen or your finger to write or perform mouse function. For IQBoard ET, you can use the enclosed electronic pen or electronic pointer to operate. Following are the tips for some basic operations: Single-click If you use pen or finger, press the surface with pen tip or finger tip at proper strength. If you use electronic pointer, touch the surface with the electronic pointer tip, then press the interactive button on the pointer body. Double-click If you use pen or finger, press the surface twice with pen tip or finger tip at proper strength. If you use electronic pointer, touch the surface with the electronic pointer tip, then press the interactive button on the pointer body. Right-click If you use pen or finger, press the surface with pen tip or finger tip, and hold for 2 seconds to popup the right-key menu. If you use electronic pointer, touch the surface with the electronic pointer tip, then press the interactive button and hold for 2 seconds on the pointer body. Drag If you use pen or finger, press an object with pen tip or finger tip and hold, then move the pen tip or finger tip to drag the object to the desired position. If you use electronic pointer, press the object with pointer tip, then press and hold down the button on the pointer body, and move the pointer tip to drag the object to the desired position Write: If you use pen or finger, start IQBoard Software, select a drawing tool, then you can write or draw by pressing the surface with pen tip or finger tip. If you use electronic pointer, start IQBoard Software, select a drawing tool, then you can write or draw by pressing the surface with pointer tip, and pressing and holding the button on the pointer body. 7. 2 Use Touch Recognition Once you have enabled Touch Recognition, you can use this convenient function to write, select object, and erase content. [. . . ] For cleaning the mark left by the permanent marker, first paint some ink of dry erase marker on the mark (the ink of dry erase marker can dissolve the ink of permanent marker), then use soft cloth to clean. If the mark still exists, spay some whiteboard detergent, and clean it out. Note: Please do not use other organic solvent for cleaning. For the interactive whiteboard that support normal marker, you can use normal whiteboard eraser and wet cloth to clean. Prompt: Clean the frequently used whiteboard once a week to keep the best definition. 3. Please do not use sharp or pointed objects to scratch the surface and frame, otherwise the scratched part may be damaged, and won't work normally. [. . . ]