User manual ION IPTUSB

[. . . ] We have included a handy Quickstart Guide with step-by-step instructions on software installation and operation. To install the software: simply insert the included CD into your computer and follow the on-screen instructions. After you finish converting your vinyl, you can then burn to CD or load onto portable media devices. [. . . ] Dust Cover: This cover protects the turntable from dust and abuse while not in use or while in transport. Dust Cover Latch: This latch holds the dustcover securely in place, and can easily be opened by sliding it to the left. Carry Handle: Use this handle easily remove the unit from record crates and bags, as well as carrying it in transport. Battery Cover: This holds the batteries securely in place during use and transport. AC In: This turntable is designed to work with either batteries or the power supply cord that comes with it. While the power is switched off, plug the power supply into the turntable first, then plug it into the wall power outlet, then switch on. nOTE: This unit can also be powered by 6 “D” Cell batteries (Not Included). Master Output (RCA): This “line level” output is for connecting to the input of an external audio device such as a DJ mixer, tape recorder, CD Burner, PA system, powered speaker, or a home stereo. The level of the master stereo output signal is controlled by the audio level control. 1/8” Headphone Jack: Use this jack with the 1/8” mini headphone plug. NOTE: Be sure the volume control is set to the OFF position before plugging in any headphones to avoid permanent hearing damage. 1/4” Headphone Jack: Use this jack with the 1/4” headphone plug. NOTE: Be sure the volume control is set to the OFF position before plugging in any headphones to avoid permanent hearing damage. USB Audio Output: Use the included USB Cable to connect your turntable to your computer. Refer to the software instruction guide before plugging in your turntable. Gain: This knob can be used to adjust the gain level of the audio signal from the turntable. [. . . ] NOTE: In order for the pitch to be adjusted, the tempo also changes according to what the pitch setting. RPM Selection Switch: This switch selects the RPM of the turntable platter -- 33, 45, and 78 RPM. Make sure the power is off when storing or transporting the unit, to avoid wasting battery power. [. . . ]