User manual ION FILM 2 SD PRO

[. . . ] If you do not have the materials to do this properly, consult a professional film store. Power Button Power LED OK Button Up / Mirror Button Down / Flip Button Display Film Holder Slot SD Card Slot USB Port TV Output 8 7 4 1 3 6 2 5 Note: Insert your SD card with the label facing down into the SD CARD SLOT. To eject your SD card from the SD CARD SLOT, push it in first, then pull it out of the slot. [. . . ] Turn off FILM2SD before removing your SD card (otherwise its contents may be lost). To eject your SD card from the SD CARD SLOT, push it in first, then pull it out of the slot. Now you can insert it into an SD-compatible device, such as a digital picture frame, computer or television, to view your pictures. If you want to transfer your image(s) directly to your computer from FILM2SD, connect FILM2SD to your computer with the included USB cable and select the USB icon (USB Mode) from the Main Menu to establish the connection. fILM2SD will appear as a removable device in "My Computer" (Windows) or on your Desktop (Mac). Once the connection has been established, you can copy the images to your computer by dragging the image files to your hard drive. Note: While FILM2SD is in USB Mode, you will not be able to scan other pictures. To enable scanning again, turn off FILM2SD, then turn it on again and enter Capture Mode. Note: To view your images on your TV instead of FILM2SD's DISPLAY, connect FILM2SD's TV OUTPUT to your TV's video input with the included TV output cable. 3 OPERATION & FEATURES When viewing any menus with multiple options, you can use the UP / MIRROR and DOWN / FLIP buttons to move through them and press the OK button to select one. FILM2SD will enter Capture Mode automatically if no 1 buttons are pressed for five seconds. USB Mode: Allows you to transfer your images to a 4 connected computer via USB. Once your images are on your computer, you can view and edit them as you wish. Capture Mode When in Capture Mode, a red indicator in the upper left-hand corner will indicate FILM2SD is viewing the image in the film holder. Once an image is captured, you will see the following menu options: 1. After selecting Save or Cancel, you can move the film holder to the next image you want to capture. [. . . ] To enter USB mode, connect FILM2SD to your computer’s USB port with the included USB cable. A USB symbol should appear on the DISPLAY, signifying that the connection has been established. fILM2SD will appear as a removeable device in "My Computer" (Windows) or on your Desktop (Mac). [. . . ]