User manual INTERMATIC WL250HPS

[. . . ] HID Wall Pack - WL Series INSTALLATION INSTRUCTIONS Lamp Types: High Pressure Sodium 250 Watt, Metal Halide 250 Watt Models: WL250HPS & WL250MH IMPORTANT: FOR OUTDOOR USE ONLY NOT FOR USE IN HAZARDOUS ATMOSPHERES ELECTRICAL REQUIREMENTS Read instruction sheet carefully before installing fixture. Retain instructions for future reference. A qualified electrician should complete all required wiring. [. . . ] Feed the matching voltage fixture wire, fixture wire marked "COM", and bare copper fixture grounding wire through the locknut and then out of the fixture. Confirm all unused voltage fixture wires are appropriately capped within fixture body. Using provided twist on or other approved connectors, connect the fixture wires to the supply wires. Connect the selected voltage fixture wire to the Black (hot) supply wire. Connect the White fixture wire marked "COM" to the White (neutral) supply wire. Connect the bare copper (fixture ground) wire to the supply grounding wire. Install, close, and secure lens cover with (2) screws making sure that the gasket is properly seated. To weatherproof fixture, seal all holes in housing (mounting conduit, plugs, photocontrols, etc. ) with silicone sealant. To operate, restore power to the circuit and switch light on. WL250HPS (High Pressure Sodium) Figure 3 COM X2 WL250MH (Metal Halide) Figure 4 COM CAUTION: (Metal Halide Lamps Only) Do not use lamp beyond manufactures rated life to reduce chance of lamp rupture. LAMP REPLACEMENT 1. 5. Turn lamp off at least once for 15 minutes per week to reduce chance of lamp rupture. Turn off power at circuit breaker or fuse box. [. . . ] This warranty is made by: Intermatic Incorporated/After Sales Service/7777 Winn Rd. , Spring Grove, Illinois 60081-9698/815-6757000 http://www. intermatic. com Please be sure to wrap the product securely to avoid shipping damage. THESE INSTRUCTIONS DO NOT COVER ALL VARIATIONS IN EQUIPMENT, NOR DO THEY PROVIDE FOR ALL SITUATIONS RELATED TO FIXTURE INSTALLATION, OPERATION OR MAINTENANCE. FOR FURTHER INFORMATION CONTACT YOUR DISTRIBUTOR OR INTERMATIC INCORPORATED - SPRING GROVE, ILLINOIS 60081 (815) 675-7000 www. intermatic. com 158HL12510 [. . . ]