User manual INTERMATIC WL050HPS
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INTERMATIC WL050HPS. We hope that this INTERMATIC WL050HPS user guide will be useful to you.
 |
INTERMATIC WL050HPS : Download the complete user guide (117 Ko) |
Manual abstract: user guide INTERMATIC WL050HPS
Detailed instructions for use are in the User's Guide.
[. . . ] HID Wall Pack - WL Series
INSTALLATION INSTRUCTIONS Lamp Types: High Pressure Sodium 35 Watt, & 50 Watt Models: WL035HPS & WL050HPS IMPORTANT:
FOR OUTDOOR USE ONLY NOT FOR USE IN HAZARDOUS ATMOSPHERES
ELECTRICAL REQUIREMENTS
Read instruction sheet carefully before installing fixture. [. . . ] Connect the selected voltage fixture wire to the Black (hot) supply wire. Connect the White fixture wire marked "COM" to the White (neutral) supply wire. Connect the bare copper (fixture ground) wire to the supply grounding wire. Install fixture over mounting plate nipple and tighten locknut to secure fixture body to mounting. Install, close, and secure lens cover with (2) screws making sure that the gasket is properly seated. To weatherproof fixture, seal all holes in housing (mounting conduit, plugs, photocontrols, etc. ) with silicone sealant. To operate, restore power to the circuit and switch light on.
Figure 3
COM
X2
LAMP REPLACEMENT
1. Remove old lamp and replace with new lamp of correct type and wattage. [. . . ] FOR FURTHER INFORMATION CONTACT YOUR DISTRIBUTOR OR INTERMATIC INCORPORATED - SPRING GROVE, ILLINOIS 60081 (815) 675-7000 www. intermatic. com
158HL12113 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE INTERMATIC WL050HPS
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INTERMATIC WL050HPS will begin.