User manual INTERMATIC T106R

[. . . ] 158TS10916 10/31/03 10:06 AM Page 1 MODEL: T106R LR3730 24 HOUR DIAL TIME SWITCH IN TYPE 3R RAINPROOF ENCLOSURE SUITABLE FOR POOL EQUIPMENT CONTROL IF INSTALLED 5 FT. [. . . ] To wire as SINGLE POLE NORMALLY CLOSED, move motor lead from terminal 3 to 1, and connect LINE to 1, LOAD to 2. To wire as SINGLE POLE DOUBLE THROW, install jumper (the same gauge as LINE wire) between terminals 2 and 3 and connect LINE to 2, LOADS to 1 and 4. REPLACE INSULATOR BEFORE TURNING ON ELECTRICITY. MINIMUM COPPER WIRE SIZE (AWG) MAX. 240 V. PRESSURE PLATE TERMINAL SCREW MAKE SURE WIRE INSULATION CLEARS PRESSURE PLATE 14 12 10 8 15 20 30 40 60 60 60 75 1/2 1 2 - 2 2 1/2 3 5 N/A N/A PROGRAMMING INSTRUCTIONS 1. TO SET "ON" AND "OFF" TIMES: Hold trippers against edge of CLOCK-DIAL, pointing to time (AM or PM) when ON and OFF operations are desired, tighten tripper screws firmly. Turn in either direction and align the exact time-of-day on the CLOCKDIAL (the time now, when switch is being put into operation) to the pointer. [. . . ] See programming instructions. INTERMATIC INCORPORATED 158TS10916 SPRING GROVE, ILLINOIS 60081-9698 [. . . ]