User manual INTERMATIC ET100C
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INTERMATIC ET100C. We hope that this INTERMATIC ET100C user guide will be useful to you.
 |
INTERMATIC ET100C : Download the complete user guide (15 Ko) |
Manual abstract: user guide INTERMATIC ET100C
Detailed instructions for use are in the User's Guide.
[. . . ] 3. 0 Watts maximum SWITCH RATING: (SPST) · 30 Amps Inductive/Resistive 24/120V A. C. , 60 Hz. [. . . ] Press the HOUR and MINUTE buttons separately to program the first ON time desired. Note the ON indicator (OFF in the next step) will only be displayed after the hour has been selected unless an ON time was previously entered. Press HOUR and MINUTE buttons separately to select first OFF time or Event #2. Repeat this procedure for up to 4 ON and 4 OFF times (8 Events) as required. TO OVERRIDE PROGRAM Program can be overridden at any time by selecting the MANUAL position. Program set times will be maintained but will not operate the controlled load(s) automatically. TO CHANGE OR DELETE PROGRAM SET POINTS Place Program Selector switch into PROGRAM mode. Note that the times which have been programmed will be displayed or 0:00 will be displayed if no set point has been entered. [. . . ] after installation of Time Switch).
INTERMATIC INCORPORATED
SPRING GROVE, ILLINOIS 60081-9698
LR3730
158ET10654 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE INTERMATIC ET100C
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INTERMATIC ET100C will begin.