User manual INTERMATIC 158TS10929

[. . . ] Project4 7/27/04 4:23 PM Page 1 MODEL: SWITCH WITH "SKIPPER®" T173CR 24 HR DIAL TIME DOUBLE POLE SINGLE THROW DPST) IN TYPE 3R RAINPROOF ENCLOSURE, LR3730 AND SPRING-WOUND CARRY-OVER MOTOR 40 AMP. [. . . ] To make power connections remove 1/2 inch of insulation from wire ends. REPLACE INSULATOR BEFORE TURNING ON ELECTRICITY. MINIMUM COPPER WIRE SIZE (AWG) MAX. 240 V. PRESSURE PLATE TERMINAL SCREW MAKE SURE WIRE INSULATION CLEARS PRESSURE PLATE 14 12 10 8 15 20 30 40 60 60 60 75 1/2 1 2 - 2 2 1/2 3 5 N/A N/A PROGRAMMING INSTRUCTIONS 1. TO SET "ON" AND "OFF" TIMES: Hold trippers against edge of CLOCK-DIAL, pointing to time (AM or PM) when ON and OFF operations are desired, tighten tripper screws firmly. Turn in either direction and align the exact time-of-day on the CLOCK-DIAL (the time now, when switch is being put into operation) to the pointer. TO SKIP OPERATION(S) ON SELECTED DAY(S): Insert SKIPPING SCREW(S) in SKIPPER WHEEL for day(s) automatic operation(s) is/are NOT required. [. . . ] See programming instructions. INTERMATIC INCORPORATED 158TS10929 SPRING GROVE, ILLINOIS 60081-9698 [. . . ]