User manual INTERMATIC 158T10710

[. . . ] Project4 7/27/04 3:45 PM Page 1 MODEL: T185 24 HOUR DIAL TIME SWITCH WITH ADJUSTABLE TRIPPERS LR3730 LISTED 885L ONE NORMALLY OPEN -ONE NORMALLY CLOSED CONTACTS MAY BE WIRED AS SINGLE POLE DOUBLE THROW. 40 AMP. [. . . ] Use 3//16 or larger screwdriver, tighten terminal screws firmly (25lb-in minimum). REPLACE FRONT INSULATOR BEFORE TURNING ON ELECTRICITY. MINIMUM COPPER WIRE SIZE (AWG) MAX. 240 V. PRESSURE PLATE TERMINAL SCREW MAKE SURE WIRE INSULATION CLEARS PRESSURE PLATE 14 12 10 8 15 20 30 40 60 60 60 75 1/2 1 2 - 2 2 1/2 3 5 N/A N/A PROGRAMMING INSTRUCTIONS · TO SET TRIPPER(S): A. 1 inset); move time selector pointer to desired timing (scale is in minutes); tighten screw A. Place TRIPPER(S) on CLOCK-DIAL at time(s) daily operation(s) is/are to take place. Turn in either direction and align the exact time-of-day on the CLOCK-DIAL (the time now, when switch is being put into operation) to the pointer. [. . . ] See programming instructions. INTERMATIC INCORPORATED SPRING GROVE, ILLINOIS 60081-9698 158T10710 [. . . ]