User manual INTER-M CMX-1242

[. . . ] 2-Bus Mixing Consoles Features s s s s CMX-1242/1642 s s s s s s s Low noise and high fidelity 12, 16 channel inputs 4 Aux sends per channel 3-Band EQ (with variable midrange frequency) Mic/line input selector switch 80mm fader 2 Stereo aux/return with AFL switches Tape in and record out Balanced mono out +48VDC phantom power 10-Segment level meter CMX-1242 shown Description The CMX-1242 and CMX-1642 are high-performance professional mixing consoles well-suited for permanent installations and on-the-road use. [. . . ] Phantom power is provided globally to all channels while 80 mm Panasonic slide faders provide accurate and smooth channel control. The master section provides 2 busses with assignment to the stereo mix master as well as a mono output for driving near field monitors, or additional fills for larger format P. A. Two stereo AUX returns drive directly into SUB MASTERS via pan pots and assign switches. 36 W 31 lbs (14 kg) Technical Specifications ELECTRICAL Frequency response THD rated @ +14 dB output Maximum voltage gain Input channels Main outputs Aux send Mon. out Headphone out Hum and noise Phantom power mic line chan Each channel has both XLR and CMX-1642 < 0. 1% 20 Hz to 20 kHz 84 dB to L/R, mono -60 dB @ 5-600 ; Balanced; (XLR) -20 dB/10 k ; Unbalanced; 1/4" +4 dB/600 ; Balanced; XLR +4 dB/600 ;Unbalanced; 1/4" +4 dB/600 ;Unbalanced; 1/4" -10 dBV/10 k; Unbalanced 30mV @ 40 -127 dB +48VDC CMX-1242 20 Hz to 20 kHz (+1/-2 dB @ 600 all outputs) GENERAL Power source AC Power consumption Weight Dimensions (W x H x D) 31 W 26. 4 lbs (12 kg) 120VAC @ 60 Hz 20. 5" (520 mm) x 4. 29" (109 mm) x 20" (509 mm) 24. 9" (632 mm) x 4. 29" (109 mm) x 20" (509 mm) The CMX-1242 and CMX-1642 are powered by 120VAC @ 60 Hz. CMX-1242/CMX-1642 Architectural and Engineering Specifications Both the 12 and 16 channel versions of the mixing console shall feature 120 degree connectors from the unit surface. Input gain on each of the channels shall range from a -60 dB microphone to a +4 dB line level signal while three band EQ with mid sweep shall add to the clarity of each channel. There shall be four auxiliaries on each channel for use as either a monitor or an effects loop, and a pan pot shall be provided for assignment to the submains and/or the mix masters. Phantom power shall be provided globally to all channels while 80 mm Panasonic slide faders shall provide accurate and smooth channel control. The master section shall have two busses with assignment to the stereo mix master as well as a mono output for driving near field monitors, or additional fills for larger format P. A. [. . . ] The power amplifier shall be an InterM model __________________ [CMX-1242 or CMX-1642]. CMX-1242 Front & Rear Views interM Dallas, Texas Vancouver, BC Tel (903) 455-2001 Tel (604) 291-8401 800-233-5014 800-663-1042 Fax (903) 455-2233 Fax (604) 294-2697 Available from: Specifications subject to change without notice. [. . . ]