User manual INTELLINET 501712

[. . . ] If the network manager needs to modify any of the settings, the NAS provides an intuitive Web-based user interface. NOTE: Make sure that the TCP/IP protocol is installed on the networked computers that wish to access the NAS. Hardware Installation Connect the included Ethernet cable and power adapter to the back of the NAS. Connect the other end of the Ethernet cable to an available port on a network switch, router or computer's LAN port. 4 Plug the AC adapter into a surge protector. Turn on the power on the NAS. If the LAN link LED in the front of the NAS is not ON, please change the switch next to the LAN port of the NAS unit to the alternate position. Power off the NAS and turn it back on to get an IP address from the network. Accessing the NAS If your unit shipped with a preformatted hard drive, you can find the new share folder by double clicking My Network Places and the Nas device name. Mapping A Share Folder Mapping your shared folder(s) to your computer makes accessing them easier. [. . . ] Note: You must enter the port number when calling up the UI in the browser if it's different than the default port 80. The mail server should allow e-mails from the same network. E-mail address to send the alerts to. 13 Firmware Update Updates and functionality can be added via this function. Please check the web for the latest firmware if you are having any issues. In general, no update should be needed unless it is recommended by technical support. Note: Do not do a firmware update over a wireless connection or power the unit down during a firmware update. Any interruption during an update will damage your unit and require you to send it in for service. Current firmware version Select Browse and locate the updated firmware. If the firmware file is not correct, it will not update the firmware in the unit. The version number will remain the same after the firmware update procedure. The update percentage will update the status. Click Restart when the upload is complete. Though it is not generally necessary, you should Restore factory default to make sure that new features and settings are implemented. All data will be lost. 14 Time Settings The NAS's built-in clock should be adjusted to the current local time. This will insure accurate time reporting in the logs and file records. When complete, click the Apply button. 18 NAS Management Manage the main functions of the shared storage from this menu. HD Initialization Wizard The first time you use the NAS, you may have to initialize the hard disk. By enabling SMART, the NAS will report when the hard drive is about to fail. The HD Power Management should be enabled to prolong the life of the hard drive. When there is no activity for the set time period, the hard drive will power down to conserve power, save wear and tear, and prevent the unit from building up unnecessary heat. When a user wants to access the storage, the NAS will automatically wake up. Click OK to the warning message to continue the process. Enter the workgroup name, description and initial share folder name. The workgroup name should be the same one that the computers accessing the NAS are on. Click Next to continue. 19 You can find your workgroup name by right clicking on My Computer and selecting Properties. You must assign at least one user to this share folder. (1) Highlight the user on the list to the right, (2) select the permission you want them to have: Read/Write or Read Only, (3) click on the button to move the user over to the Allowing User List. 3 1 Highlight users on the left list and select the button to remove them from the share or change their permissions. The progress of the initialization will be displayed. 2 You can also view the progress by returning to the main wizard screen. Once the initialization is complete, the status will change to Ready. 20 USB HD Information Each of formatted partitions (FAT32, EXT2 and EXT3) on the attached USB storage drive will be shown in the USB HD information page. [. . . ] UPnP media receivers using the UPnP media receiver standard will be able to view and play media files located in the UpnPMedia shared folder when this feature is enabled. UPnP NAS Device must also be enabled for the server to function properly. A new share folder called UPnPMedia will be created with the guest user assigned to it. You should change the user access and security (located in File Sharing) to your current network setup. [. . . ]