User manual INDESIT IHVP 6.6 LM K

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INDESIT IHVP 6.6 LM K. We hope that this INDESIT IHVP 6.6 LM K user guide will be useful to you.


INDESIT IHVP 6.6 LM K : Download the complete user guide (5298 Ko)

You may also download the following manuals related to this product:

   INDESIT IHVP 6.6 LM K (523 ko)
   INDESIT IHVP 6.6 LM K (1111 ko)
   INDESIT IHVP 6.6 LM K (673 ko)
   INDESIT IHVP 6.6 LM K (969 ko)
   INDESIT IHVP 6.6 LM K (575 ko)

Manual abstract: user guide INDESIT IHVP 6.6 LM K

Detailed instructions for use are in the User's Guide.

[. . . ] The ducting system for this appliance must not be connected to any existing ventilation system which is being used for any other purpose such as discharging exhaust fumes from appliances burning gas or other fuels. Do not use or leave the hood without the lamp correctly mounted due to the possible risk of electric shocks. The hood must NEVER be used as a support surface unless specifically indicated. Use only the fixing screws supplied with the product for installation or, if not supplied, purchase the correct screws type. [. . . ] The company declines any responsibility whenever these regulations are Your cooker hood is ready to be used in suction version. To use the hood in filtering version the special ACCESSORY KIT must be installed. Check on the first pages of this manual if the ACCESSORY KIT is furnished or must be bought separately. Note: If furnished, in certain cases, the additional activated carbon filtering system may be installed on the hood. Information about the conversion of the hood from suction version to filtering version is present in this manual. Ducting version In this case the fumes are conveyed outside of the building by means of a special pipe connected with the connection ring located on top of the hood. Diameter of the exhausting pipe must be equal to that of the connection ring. If the hood is supplied with active charcoal filter, then it must be removed. Filter version The aspirated air will be degreased and deodorised before being fed back into the room. In order to use the hood in this version, you have to install a system of additional filtering based on activated charcoal. The hood is fitted with a control panel with aspiration speed selection control and a light switch to control cooking area lights. Note: The intensive extraction speed (power) is timed and lasts for 5 minutes (indicator c flashes); the hood then reverts to extraction speed (power) 2. ON/OFF Timer button: delays the deactivation of the selected extraction speed (power) by 5 minutes. Note: the button is also used for the "Filter saturation signal reset" function 4. Extraction speed (power): the indicator rotates according to the selected extraction speed (power). Grease filter saturation: comes on when filter maintenance is required. Active carbon filter saturation: comes on when filter maintenance is required. Note: this function is normally disabled and should only be activated if the hood is used as a filter version (with carbon filter fitted). To do so, proceed as follows: - switch off the hood - press and hold buttons 1 and 3 at the same time, until the indicator stops flashing (indicator disabled) and is lit steadily (indicator enabled). To deactivate it, repeat the procedure: the indicator will no longer be lit steadily (indicator enabled) and will flash instead (indicator disabled). Safety operation The hood has a sensor which, in the event of a sudden increase in temperature, activates the appliance until the temperature drops significantly. Filter saturation signal reset After carrying out filter maintenance, press and hold button 3 until indicator. [. . . ] mALFUNCTIONS If something appears not to be working properly, do the following simple checks before calling Technical Service: · If the hood is not working: Check that: - The power has not been disconnected. If the hood performs inefficiently: Check that: - The motor speed selected is sufficient for the amount of smoke and vapours released. If the hood has turned off during normal functioning: Check that: - The power has not been disconnected. If the hood fails to operate correctly, briefly disconnect it from the mains power supply for almost 5 sec. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE INDESIT IHVP 6.6 LM K




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INDESIT IHVP 6.6 LM K will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.