User manual IMG STAGE LINE DPR 110

[. . . ] (indication INTRO) 6 Infrared sensor for the remote control signals 7 Buttons FOLDER SKIP for selecting the first title in another folder: With the left button the unit goes to the first title of the previous folder and with the right button to the first title of the next folder. 8 Buttons DOWN/REV and UP/CUE for the title selection and the fast forward and reverse Title selection Each time the button UP/CUE is pressed, the unit advances one title; by pressing the button DOWN/REV, the unit goes to the title beginning and with each further pressing, the unit goes back one more title. Fast forward/reverse For the fast forward, keep the button UP/CUE pressed, for the reverse the button DOWN/ REV. 9 Button STOP to stop the playing 10 Button PLAY/PAUSE to switch between replay and pause 19 Audio output with line level (left and right channels) 20 Recording input REC for connecting a signal source with line output (e. [. . . ] With the button FIND it is possible to go back to the time indication in the same way. 1 Direct selection of the title number The title can directly be selected by entering its number with the numerical keys (11). While playing, the display (2) shows the title number and the time already played of the title (min. The small, upper number shows the number of the folder containing the title. 2) To interrupt the replay, set the unit to pause with the button PLAY/PAUSE. The lower display line shows "A ­" and the first title starting with the letter A. 2) With the button UP/CUE [search in forward direction] or DOWN/REV (8) [backward direction] select the initial letter of the title searched. NONE is displayed for letters and numbers not referring to a title beginning. 3) If there are several titles with the same initial letter, keep the button DOWN/REV or UP/CUE pressed after selecting the letter until the initial letter flashes. Then look for the title by repeated, short pressing of the button DOWN/REV or UP/CUE. 4) When looking for the title, always the title number (small, upper number) is displayed. If the desired title has been found, start the replay with the button PLAY/PAUSE (10). 4 Folder selection and folder search function With the buttons FOLDER SKIP (7) it is possible to go to the first title of the next folder (right button) and to the first title of the previous folder (left button). A certain folder can be found easier and quicker with the search function: 1) Shortly press the button FIND (15) twice so that the indication ALBUM and the name of the present folder are displayed. Note: If the button is pressed for more than a second, Note: The titles are consecutively numbered by the unit as follows: 1. The folders are not numbered in alphabetic order but the number of the folder can easily be found with the folder search function ( chapter 5. The title numbers are also displayed during alphabetic search of titles ( chapter 5. The corresponding folder number is shown as a small number on the top left of the display. 3) If the desired folder has been found , press the button PLAY/PAUSE. With the button UP/CUE it is possible to go from the last title in a folder to the first title of the next folder and with the button DOWN/REV from the first title in a folder to the last title of the previous folder. For playing the titles in a random order, press the button RANDOM (12). Short playing of a title beginning The unit replays each of the following titles for 10 seconds (indication: INTRO). [. . . ] 2) Selecteer met de toets UP/CUE [vooruit zoeken] of DOWN/REV (8) [achteruit zoeken] de letter met welke de gezochte track begint. U kunt met de toets UP/ CUE ook van de laatste track in een map naar de eerste track van de volgende map springen, en met de toets DOWN / REV van de eerste track in een map naar de laatste track van de vorige map. 8) Met de toetsen DOWN/REV en UP/CUE kunt u track van de reeks selecteren, of u kunt door de betreffende toets ingedrukt te houden de functie Snel vooruit/achteruit zoeken binnen een track activeren. Om te programmeren moet u de nummering van de mappen kennen, want voor elke te programmeren track moet het bijbehorende nummer van de map worden ingevoerd ( hoofdstuk 5. [. . . ]