User manual IKEA FINSMAKARE MICRO

[. . . ] ENGLISH Please refer to the last page of this manual for the full list of IKEA appointed After Sales Service Provider and relative national phone numbers. safety information Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damage. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. [. . . ] Press again and again until the Display shows the necessary clock function and the related symbol. The function: Heat + Hold keeps prepared food warm at 80 °C for 30 minutes. time Extension The function: Time Extension makes the heating function continue after the end of Duration. You can find the recipes for the automatic programmes specified for this oven on the website www. To find the proper Recipe Book check the article number on the rating plate on the front frame of the oven cavity. When you use the function: Manual, the oven uses the automatic settings. Wire shelf: Push the shelf between the guide bars of the shelf support and make sure that the feet point down. Baking tray: Push the baking tray between the guide bars of the shelf support. The high rim around the shelf prevents cookware from slipping of the shelf. Always use the microwave bottom glass plate when the microwave function is on. The microwave bottom glass plate can become hot when the oven operates. Push the baking tray between the guide bars of the shelf support and the wire shelf on the guide bars above. You can save your favourite settings, such as duration, temperature or heating function. You cannot save Microwave and microwave combi functions as favourite programmes. When the display shows the first free memory position , use the shuttle and press to overwrite an existing programme. You can change the name of a programme in the menu: Edit Programme Name. function Lock This function prevents an accidental change of the heating function. set + Go The function lets you set a heating function (or a programme) and use it later with one press of any symbol. Press again and again until the Press again and again until the Press any symbol (except for ) to start the function: Set + Go. The menu: Basic Settings lets you turn the function: Set + Go on and off. For safety reasons the oven turns off automatically after some time if a heating function works and you do not change any settings. The Automatic switch-off does not work with the functions: Light, Duration, End Time. [. . . ] Non-functional and decorative parts which do not affect normal use of the appliance, including any scratches and possible color differences. Damage to the following parts: ceramic glass, accessories, crockery and cutlery baskets, feed and drainage pipes, seals, lamps and lamp covers, screens, knobs, casings and parts of casings. Unless such damages can be proved to have been caused by production faults. Repairs not carried out by our appointed service providers and/or an authorized service contractual partner or where nonoriginal parts have been used. [. . . ]